Miata 90-05| ID1300-XDS
$945.00 – $995.40
ID1300-XDS, for 90-05 Miata, 1.6L / 1.8L, 11mm (blue) adaptors, -204 lower cushions (remove lower o-ring retainer) Set of 4.
Base Specifications
- Nominal Flow Rate – 1340cc/min @ 3.0 Bar (43.5 psi) Using Iso Octane at 52 Degrees C (125 Degrees F)
- Maximum Differential Fuel Pressure – 6.0 Bar (87.0 psi)
- Fuel Compatibility – Compatible With All Known Fuels – (Designed Specifically for Alternative Fuels)
- Electrical Connector – USCAR
Description
The ID1300 is an all new injector, designed in partnership with Bosch Motorsport. This collaboration has given us the ability to design a high flow injector with characteristics specific to the needs of the motorsport tuner. The ID1300 was designed with alternative fuels in mind, and is the only performance injector available with all stainless internals. It is compatibwle with all known fuels, and will stand up to the corrosive nature of alcohol better than any injector on the market.
While the ID1300 was designed with an eye towards ethanol fueled engines, we have accounted for the occasional need to convert back to gasoline. The ID1300 has a minimum fuel mass compatible with gasoline use, and will provide exceptional idle and cruise behavior under these conditions. In addition to its multi-fuel capabilities, the compact body of the ID1300 allows fitment in 200+ applications, making it the most versatile injector in our lineup. The 1300 has continued to be refined and improved over the years, and the 1300-XDS is the latest and best version to date.
Additional information
| Weight | 12 lbs |
|---|---|
| Dimensions | 1 × 1 × 1 in |
| Brand | Injector Dynamics |
Quick Comparison
| Settings | Miata 90-05| ID1300-XDS remove | Ultra Race Plenum Spacer - 2L Black remove | Ultra Street Plenum Spacer - Silver remove | Skunk2 Ultra Street Intake Manifold - K20A2 Style - Black remove | Pro Intake Manifold - B16/B17/B18C5 - Black remove | Fuel Rail - Ultra Race - B Series Primary remove | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | Miata 90-05| ID1300-XDS remove | Ultra Race Plenum Spacer - 2L Black remove | Ultra Street Plenum Spacer - Silver remove | Skunk2 Ultra Street Intake Manifold - K20A2 Style - Black remove | Pro Intake Manifold - B16/B17/B18C5 - Black remove | Fuel Rail - Ultra Race - B Series Primary remove | ||||||||||||||||||||||||||||||||
| Image |  |  |  |  |  |  | ||||||||||||||||||||||||||||||||
| SKU | 1300.11.02.60.11.4|Miata 90-05 | 907-05-9052 | 907-05-9100 | 307-05-0605 | 307-05-0295 | 350-05-6000 | ||||||||||||||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||||||||||||||
| Price | $945.00 – $995.40 | $173.99 | $104.99 | $578.99 | $283.99 | $188.99 | ||||||||||||||||||||||||||||||||
| Stock | ||||||||||||||||||||||||||||||||||||||
| Availability | ||||||||||||||||||||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||||||||||||||
| Description | ID1300-XDS, for 90-05 Miata, 1.6L / 1.8L, 11mm (blue) adaptors, -204 lower cushions (remove lower o-ring retainer) Set of 4.
Base Specifications
| 907-05-9052 The Skunk2 Racing Plenum Spacer is used to increase the internal volume of the Ultra "Race" Intake Manifolds by 2 Liter. INCLUDES: 2L Billet Aluminum Spacer Longer Socket Head Hardware Gaskets | 907-05-9100 The Skunk2 Racing Plenum Spacer is used to increase the internal volume of the Ultra "Street" Intake Manifolds by .50 Liters. INCLUDES: .50L Billet Aluminum Spacer Longer Socket Head Hardware Gaskets | 307-05-0605 FEATURES: Modular 2pc. Design w/ Removable Plenum Rotatable Plenum Allows Driver-side or Passenger-Side Throttle Body Mounting 1.8L Plenum Volume ** Tapered 6.85" Long High-Velocity Runners w/ Raised Velocity Stack Entries Generously Cast Runner Walls for Porting 71mm Throttle Body Opening Lightweight 356 Aluminum Alloy Construction Hi-Grade Mounting Hardware Thermal Gasket Included 2 x 1/4" NPT and 2 x 1/8" NPT Accessory Ports **Optional Billet Aluminum Plenum Spacer Available in .5L Size | Limited-edition, Black Series finish. Ideal for turbocharged and naturally aspirated applications. 70mm throttle body opening can be port-matched up to 74mm. | 350-05-6000 Engineers at Skunk2 Racing have developed a Primary Fuel Rail for the popular Ultra Race Intake Manifold. FEATURES: Manufactured from Billet 6061 Aluminum Hard Anodized for Corrosion Resistance Large .669" Internal Bore -8 ORB Ports Supports Up to 1,200HP Compatible w/ E85 and Methanol. Requires Remote Mount Regulator. | ||||||||||||||||||||||||||||||||
| Content | The ID1300 is an all new injector, designed in partnership with Bosch Motorsport. This collaboration has given us the ability to design a high flow injector with characteristics specific to the needs of the motorsport tuner. The ID1300 was designed with alternative fuels in mind, and is the only performance injector available with all stainless internals. It is compatibwle with all known fuels, and will stand up to the corrosive nature of alcohol better than any injector on the market. While the ID1300 was designed with an eye towards ethanol fueled engines, we have accounted for the occasional need to convert back to gasoline. The ID1300 has a minimum fuel mass compatible with gasoline use, and will provide exceptional idle and cruise behavior under these conditions. In addition to its multi-fuel capabilities, the compact body of the ID1300 allows fitment in 200+ applications, making it the most versatile injector in our lineup. The 1300 has continued to be refined and improved over the years, and the 1300-XDS is the latest and best version to date. | The much anticipated Ultra "Street" Intake Manifold for the '02-'05 Civic Si and '02-'06 RSX/ RSX Type S, and/ or any swap using the K20A/ K20A2/ K20Z1/ K24A1 engines or cylinder heads has finally arrived! The Ultra Series is years of research and development, culminated in a multi-piece cast aluminum intake manifold that offers advantages that only a modular design could allow. Using the latest in CFD (Computational Fluid Dynamics) software; Skunk2 Racing has created a two-piece modular design that allows for easy disassembly, porting, and plenum volume changes through the use of a removable plenum lid and optional plenum spacers. In addition to CFD testing, the Ultra Series Intake Manifold has undergone extensive in-house dyno testing which has led to a design that is less restrictive, yielding both torque and power gains well over many of the competitors. Skunk2 Racing Ultra Street Intake Manifolds are cast-aluminum, manufactured from high-grade 356 aluminum alloy for strength and lightweight. Each manifold is CNC-machined for a precise fit, and individually inspected for quality assurance. The Ultra Series Street manifold features a generous 71mm throttle body opening and is constructed with thick walls at entry, minimizing concerns of breakthrough when port matching. Intense planning and design went into the plenum to distribute even airflow to all four cylinders under dynamic load conditions. Placement and design of the velocity stacks were rigorously flow tested to ensure maximum delivery of air to the cylinder. Large velocity stack raised bell mouth entries lead to 6.85” long intake runners with smooth transitions allowing the Ultra Street Intake Manifold to really move some air! Skunk2 Racing Ultra Street Intake Manifolds are designed to be used in modified naturally aspirated applications as well as mild turbo/supercharged setups. | More than a decade ago, Skunk2’s engineers looked to the popular Integra Type R intake manifold for inspiration and went back to the drawing board. Skunk2’s Pro Series Intake Manifold in its signature Black Series finish for Honda's B-series VTEC engines (non-GS-R) features a larger plenum and oversized runners when compared to the ITR manifold for maximum horsepower and torque gains. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, the Pro Series manifold was designed for the “street enthusiast” who wants more power but doesn’t want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains. Skunk2’s cast-aluminum Pro Series Intake Manifolds for Honda’s B-series engines are a direct-fit replacement for all B-series engines thanks to three separate flange designs and are compatible with all factory sensors and throttle bodies as large as 75mm. Pro Series Intake Manifolds offer horsepower and torque gains greater than competitors’ manifolds but without compromising mid-range power output. The design incorporates specially tapered runners as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined to best match the cylinder head’s ports. Skunk2’s Pro Series Intake Manifold’s shape and design also increases wave scavenging effects at the engine’s ideal operating range, which allow for a broad increase in usable power. Skunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2’s Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality. Each manifold is molded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out and features a genuine Skunk2 nameplate. | Fitment:
| ||||||||||||||||||||||||||||||||||
| Weight | 12 lbs | 3 lbs | 3 lbs | 15 lbs | N/A | 1.25 lbs | ||||||||||||||||||||||||||||||||
| Dimensions | 1 × 1 × 1 in | 20 × 8 × 8 in | 20 × 8 × 8 in | 20 × 16 × 9 in | N/A | 16 × 5 × 3 in | ||||||||||||||||||||||||||||||||
| Additional information |
|
|
|
|
|
|
Reviews
There are no reviews yet.