Lun - Sab 9:00 am - 5:00 pm

HomeShopFuel SystemInjectorsID1050-XDSFordFocus RS MK II-IV| ID1050-XDS

Focus RS MK II-IV| ID1050-XDS

$682.50$719.25

ID1050-XDS, for Ford RS MKII-IV applications, 14 mm (grey) adaptors. Set of 5.

Base Specifications

  • Nominal Flow Rate – 1065cc/min @ 3.0 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F)
  • Maximum Differential Fuel Pressure – 10.0 Bar (145.0 psi)
  • Fuel Compatibility – Compatible With All Known Fuels
  • Electrical Connector – USCAR
SKU: 1050.48.14.14.5|Focus RS MK II-IV Category: Tags: , , , ,

Description

The ID1050x is the evolution of the ID1000, and the latest addition to the X-Series. It is the most recent offering from the partnership of Injector Dynamics and Bosch Motorsport, and is the result of lessons learned during development of the ID1300x, and ID1700x.

Like the ID1300x and ID1700x, the ID1050x is not a modified production component. It is a built to spec motorsport injector, offering optimization of critical operating parameters important to you, the motorsport tuner.

To learn more about the nature and development of the X-Series injectors, follow this link.

Compared to the original ID1000, the ID1050x offers numerous improvements, and is sure to become the new reference.

Corrosion resistant internals make it compatible with all known fuels, capable of extended service life with corrosive fuels.

Compact body allows fitment in 200+ applications, including current and future engines utilizing short body injectors.

Improved internal flow path increases output by 5% without sacrificing low flow performance.

Stronger magnetic circuit offers stable operation up to 10 bar.

Replaceable inlet filter extends service life.

Additional information

Weight 12 lbs
Dimensions 1 × 1 × 1 in
Brand

Injector Dynamics

Reviews

There are no reviews yet.

Be the first to review “Focus RS MK II-IV| ID1050-XDS”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsFocus RS MK II-IV| ID1050-XDS removeFuel Rail - Ultra Race - B Series Primary removeFuel Rail - Ultra Race - B Series Secondary removePro Intake Manifold - B18C1 - Black removePro Intake Manifold - D Series - Black removeAlpha 70mm Throttle Body - B/D/F/H Series remove
ImageFocus RS MK II-IV| ID1050-XDSFocus RS MK II-IV| ID1050-XDSFocus RS MK II-IV| ID1050-XDSFocus RS MK II-IV| ID1050-XDSFocus RS MK II-IV| ID1050-XDSFocus RS MK II-IV| ID1050-XDS
SKU1050.48.14.14.5|Focus RS MK II-IV350-05-6000350-05-6010307-05-0275307-05-0265309-05-1050
Rating
Price$682.50$719.25 $188.99 $188.99 $283.99 $273.99 $125.99
Stock
Availability
Add to cart

Select options

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionID1050-XDS, for Ford RS MKII-IV applications, 14 mm (grey) adaptors. Set of 5. Base Specifications
  • Nominal Flow Rate – 1065cc/min @ 3.0 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F)
  • Maximum Differential Fuel Pressure – 10.0 Bar (145.0 psi)
  • Fuel Compatibility – Compatible With All Known Fuels
  • Electrical Connector – USCAR
350-05-6000 Engineers at Skunk2 Racing have developed a Primary Fuel Rail for the popular Ultra Race Intake Manifold. FEATURES: Manufactured from Billet 6061 Aluminum Hard Anodized for Corrosion Resistance Large .669" Internal Bore -8 ORB Ports Supports Up to 1,200HP Compatible w/ E85 and Methanol. Requires Remote Mount Regulator.350-05-6010 Engineers at Skunk2 Racing have developed a Secondary Fuel Rail for the popular Ultra Race Intake Manifold. FEATURES: Manufactured from Billet 6061 Aluminum Hard Anodized for Corrosion Resistance Large .669" Internal Bore -8 ORB Ports Supports Up to 1,200HP Compatible w/ E85 and Methanol. Requires Remote Mount Regulator.307-05-0275 Limited-edition, Black Series finish. Ideal for turbocharged and naturally aspirated applications. Eliminated secondary butterflies for improved airflow and horsepower. 70mm throttle body opening can be port-matched up to 74mm.  Skunk2’s cast-aluminum Pro Series Intake Manifolds for Honda’s D-series engines are a direct-fit replacement for most D-series engines and are compatible with all factory sensors. Pro Series Intake Manifolds offer horsepower and torque gains greater than competitors’ manifolds but without compromising mid-range power output. The design incorporates specially tapered runners as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined to best match the cylinder head’s ports. Skunk2’s Pro Series Intake Manifold’s shape and design also increases wave scavenging effects at the engine’s ideal operating range, which allow for a broad increase in usable power.  
309-05-1050
FEATURES: Precision Die-Cast Aluminum Fine Shot-Blasted Surface Finish Precision Machined Brass Throttle Plate Compatible w/ OEM Throttle Cable Sealed Ball Bearings for Smooth Operation New Throttle Body Gasket and Hardware Idle Adjustment Screws for Fine Tuning
ContentThe ID1050x is the evolution of the ID1000, and the latest addition to the X-Series. It is the most recent offering from the partnership of Injector Dynamics and Bosch Motorsport, and is the result of lessons learned during development of the ID1300x, and ID1700x. Like the ID1300x and ID1700x, the ID1050x is not a modified production component. It is a built to spec motorsport injector, offering optimization of critical operating parameters important to you, the motorsport tuner. To learn more about the nature and development of the X-Series injectors, follow this link. Compared to the original ID1000, the ID1050x offers numerous improvements, and is sure to become the new reference. Corrosion resistant internals make it compatible with all known fuels, capable of extended service life with corrosive fuels. Compact body allows fitment in 200+ applications, including current and future engines utilizing short body injectors. Improved internal flow path increases output by 5% without sacrificing low flow performance. Stronger magnetic circuit offers stable operation up to 10 bar. Replaceable inlet filter extends service life.Fitment:
  • 1999 - 2000 Honda Civic (1.6L Si)
  • 1994 - 1997 Honda Del Sol (1.6L VTEC)
  • 1992 - 2001 Acura Integra (1.8L GS/GS-R/LS/Type R)
Fitment:
  • 1999 - 2000 Honda Civic (1.6L Si)
  • 1994 - 1997 Honda Del Sol (1.6L VTEC)
  • 1992 - 2001 Acura Integra (1.8L GS/GS-R/LS/Type R)
More than a decade ago, Skunk2’s engineers looked to the popular Integra Type R intake manifold for inspiration and went back to the drawing board. Skunk2’s Pro Series Intake Manifold in our signature Black Series finish for Honda's B-series VTEC engines (GS-R only) features a larger plenum and oversized runners when compared to the ITR manifold for maximum horsepower and torque gains. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, the Pro Series manifold was designed for the “street enthusiast” who wants more power but doesn’t want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains. Skunk2’s cast-aluminum Pro Series Intake Manifolds for Honda’s B-series engines are a direct-fit replacement for all B-series engines thanks to three separate flange designs and are compatible with all factory sensors and throttle bodies as large as 75mm. Pro Series Intake Manifolds offer horsepower and torque gains greater than competitors’ manifolds but without compromising mid-range power output. The design incorporates specially tapered runners as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined to best match the cylinder head’s ports. Skunk2’s Pro Series Intake Manifold’s shape and design also increases wave scavenging effects at the engine’s ideal operating range, which allow for a broad increase in usable power. Skunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2’s Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality. Each manifold is molded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out and features a genuine Skunk2 nameplate.More than a decade ago, Skunk2's engineers revolutionized Honda performance by creating the first-ever, high-flow, cast aluminum intake manifold. Skunk2’s Pro Series Intake Manifold for most Honda SOHC D-series engines features a larger plenum and oversized runners when compared to the OEM version for maximum horsepower and torque gains. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, the Pro Series manifold was designed for the “street enthusiast” who wants more power but doesn’t want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains. Skunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2’s Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality. Each manifold is molded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out and features a genuine Skunk2 nameplate. Not compatible with OEM D-series throttle body. Must use larger-bore Skunk2 throttle body or similar. Not directly compatible with Civic Wagon or Wagovan; clearance modifications required. Not directly compatible with '96-'00 Civic; brake proportioning valve and fuel filter clearance required. Ideal for turbocharged and naturally aspirated applications. 66mm throttle body opening can be port-matched up to 70mm.Skunk2 is proud to introduce the 70mm Alpha Series Throttle Body for Honda B16/ B17/ B18/ B20/ D15/ D16/ F20/ F22/ F23/ H22 and H23 engines in its exclusive, fine shot-blasted surface finish. Skunk2’s Alpha Series Throttle Body is designed to be used with Skunk2’s Pro Series Intake Manifolds as well as OEM and other aftermarket intake manifolds for bolt-on horsepower and torque gains by maximizing engine airflow, all at a competitive price.   A larger throttle body is key to producing additional power throughout the powerband on modified engines with increased airflow demands and the Skunk2’s 70mm Alpha Series Throttle Body delivers! Sealed ball bearings, a precision machined throttle plate and a honed oversized bore insures smooth operation on the most aggressive naturally aspirated and forced induction applications.
  • 1990 - 1997 Honda Accord (2.4L DX/LX/EX/SE)
  • 1992 - 2000 Honda Civic (1.6L DX/EX/GX/HX/LX/Si)
  • 1993 - 1997 Honda Del Sol (1.6L S/Si/VTEC)
  • 1992 - 2001 Honda Prelude (2.2L Base/Type SH)
  • 2000 - 2009 Honda S2000 (2.2L F22C)
  • 1990 - 2001 Acura Integra (1.8L GS/GS-R/LS/Type R)
NOTE: Due to Larger Diameter... You Must Use A Skunk2 Pro Series Intake Manifold or Make Adjustments to Intake Manifold Throttle Body Flange to Match Bore and Keep IAC (Idle Air Control) Passage Separate. Not compatible with B18C GS-R intake manifold. Not compatible with D Series engines featuring down-flow intake manifolds. Manual Transmission Only.
Weight121.251.251.9
Dimensions1 × 1 × 1 in16 × 5 × 3 in16 × 5 × 3 inN/AN/A10 × 8 × 8 in
Additional information
Weight 12 lbs
Dimensions 1 × 1 × 1 in
Brand

Injector Dynamics

Weight 1.25 lbs
Dimensions 16 × 5 × 3 in
Brand

Skunk2

Weight 1.25 lbs
Dimensions 16 × 5 × 3 in
Brand

Skunk2

Brand

Skunk2

Brand

Skunk2

Weight 1.9 lbs
Dimensions 10 × 8 × 8 in
Brand

Skunk2

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
Compare ×
Let's Compare! Continue shopping
X