Lun - Sab 9:00 am - 5:00 pm

HomeShopDrivetrainSYN-GT86-1 FRS / BRZ GT86 1-2 Carbon Synchro

SYN-GT86-1 FRS / BRZ GT86 1-2 Carbon Synchro

$63.00

Description

Synchrotech® Pro Series Carbon Synchro 

Fitting: GT86 FRS/BRZ 2013+ 1st or 2nd (one synchro)

Additional information

Weight 12 lbs
Dimensions 1 × 1 × 1 in
Brand

Synchrotech

Reviews

There are no reviews yet.

Be the first to review “SYN-GT86-1 FRS / BRZ GT86 1-2 Carbon Synchro”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsSYN-GT86-1 FRS / BRZ GT86 1-2 Carbon Synchro remove92-93 MK-SYN101B-YS1 Brass Master Kit GSR Cable removeMK-SYN101 Carbon Master Kit (GSR ITR B16) removeK-Tuned K-Series Complete CMC & Slave Kit remove94-01 BSK-SYN107B Brass Rebuild Kit LS Cable remove94-01 MK-SYN107B Brass Master Kit Integra LS remove
NameSYN-GT86-1 FRS / BRZ GT86 1-2 Carbon Synchro remove92-93 MK-SYN101B-YS1 Brass Master Kit GSR Cable removeMK-SYN101 Carbon Master Kit (GSR ITR B16) removeK-Tuned K-Series Complete CMC & Slave Kit remove94-01 BSK-SYN107B Brass Rebuild Kit LS Cable remove94-01 MK-SYN107B Brass Master Kit Integra LS remove
ImageSYN-GT86-1 FRS / BRZ GT86 1-2 Carbon SynchroSYN-GT86-1 FRS / BRZ GT86 1-2 Carbon SynchroSYN-GT86-1 FRS / BRZ GT86 1-2 Carbon SynchroSYN-GT86-1 FRS / BRZ GT86 1-2 Carbon SynchroSYN-GT86-1 FRS / BRZ GT86 1-2 Carbon SynchroSYN-GT86-1 FRS / BRZ GT86 1-2 Carbon Synchro
SKUSYN-GT86-1MK-SYN101B-YS1MK-SYN101KTD-CLK-KMSBSK-SYN107BMK-SYN107B
Rating
Price$63.00$682.45$734.95$249.99$367.45$682.45
Stock
Availability
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Applications:
  • 02-06 RSX DC5
  • 02-05 Civic Si (EP3)
  • 06-11 Civic Si FG2 / FA5
  • 12-15 Civic Si (Requires switching clevis)
  • 04-08 TSX CL
  • LHD Vehicles only
ContentSynchrotech® Pro Series Carbon Synchro  Fitting: GT86 FRS/BRZ 2013+ 1st or 2nd (one synchro)Fitting: YS1 Cable GSR Trans 1992-1993 Included: 1-5 Brass Synchros, 1-5 Slider Sleeves, 5 shaft bearings, bearing clip, 2 axle seals, input seal, shift rod seal, and a new dust boot.Fitting: Y80 S80 S4C S21 Y21 (B16A/B16B/B18C) Included: 1-5 Carbon Synchros, 1-5 synchro springs, brass reverse synchro and spring, 1-5 Slider Sleeves, 5 shaft bearings, bearing clip, 2 axle seals, input seal, shift rod seal, and a new dust boot.The 2002-2006 RSX, 2002-2005 EP3, 2006-2011 8th Gen Civic Si, 2012-2015 Civic Si, and 2004-2008 Acura TSX all have a known issue with their factory clutch master cylinders (CMC). If you look at the CMC on these cars more closely, you'll notice that all of these models have a triangular shaped feedback plate positioned at the very end of the cylinder. This plate is basically a secondary valve that was designed to slow down the clutch engagement and reduce shock to the clutch itself and the surrounding drivetrain parts. This setup might be perfectly fine for people that just drive their cars for simple daily use, but the delayed engagement can cause wear to the synchros and possibly even the gears on performance applications. The reason is fairly simple, the factory CMC delays the clutch operation, so it does not open fast enough to keep up with a fast shift. This means that pressure is being applied to the transmission synchros during the shift, before they are ready for the actual gear change. The K-Tuned Clutch Master Cylinder Upgrade Kit was designed to completely replace the original factory cylinder and offer real time clutch engagement to support faster shifting. We have put together a complete bolt-on kit that includes a direct replacement CMC, our high pressure 3AN clutch line, plus all of the necessary fittings needed for installation. The factory clutch fluid reservoir is reused and connected the same way it was in stock form. The only thing we suggest is checking out your slave cylinder on the trans to confirm it is leak free. Aside from that, installation is pretty simple, install the parts and bleed the system using some new clutch fluid.Fitting: S80/Y80 Integra LS Trans 1994-2001 Included: 1-5 Brass Synchros, 1-5 synchro springs, reverse synchro and spring, 5 shaft bearings, bearing clip, 2 axle seals, input seal, shift rod seal, and a new dust boot.Fitting: Y80 S80 Integra LS GS RS 1994-2001 Included: 1-5 Brass Synchros, 1-5 Slider Sleeves, 5 shaft bearings, bearing clip, 2 axle seals, input seal, shift rod seal, and a new dust boot.
Weight1212121.151212
Dimensions1 × 1 × 1 in1 × 1 × 1 in1 × 1 × 1 in8 × 4 × 5 in1 × 1 × 1 in1 × 1 × 1 in
Additional information
Weight 12 lbs
Dimensions 1 × 1 × 1 in
Brand

Synchrotech

Weight 12 lbs
Dimensions 1 × 1 × 1 in
Brand

Synchrotech

Weight 12 lbs
Dimensions 1 × 1 × 1 in
Brand

Synchrotech

Weight 1.15 lbs
Dimensions 8 × 4 × 5 in
Brand

K-Tuned

Weight 12 lbs
Dimensions 1 × 1 × 1 in
Brand

Synchrotech

Weight 12 lbs
Dimensions 1 × 1 × 1 in
Brand

Synchrotech

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
X