Lun - Sab 9:00 am - 5:00 pm

HomeShopIntakeThrottle BodiesPro 74mm Throttle Body – B/D/F/H Series – Black
Save $13.15

Pro 74mm Throttle Body – B/D/F/H Series – Black

$262.99

FEATURES:

CNC Machined from Forged Billet 6061-T6 Aluminum
Hard Anodized for Corrosion Resistance and Durability
Precision Machined Brass Throttle Plate
Compatible w/ OEM Throttle Cable
Sealed Ball Bearings for Smooth Operation
New Throttle Body Gasket and Hardware

Description

Skunk2 is proud to introduce the 74mm Pro Series Throttle Body for Honda B16/ B17/ B18/ B20/ D15/ D16/ F20/ F22/ F23/ H22 and H23 engines found in a number of chassis from 1988-2005.

A larger throttle body is key to producing additional power throughout the powerband on modified engines with increased airflow demands and the Skunk2’s 74mm Pro Series Throttle Body delivers! Sealed ball bearings, a precision machined throttle plate and a honed oversized bore insures smooth operation on the most aggressive naturally aspirated and forced induction applications.

  • 1990 – 1997 Honda Accord (2.4L DX/LX/EX/SE)
  • 1992 – 2000 Honda Civic (1.6L CX/DX/EX/GX/HX/LX/Si)
  • 1993 – 1997 Honda Del Sol (1.6L S/Si/VTEC)
  • 1992 – 2001 Honda Prelude (2.2L Base/Type SH)
  • 2000 – 2009 Honda S2000 (2.2L F22C)
  • 1990 – 2001 Acura Integra (1.8L GS/GS-R/LS/Type R)

NOTE: Due to Larger Diameter… You Must Use A Skunk2 Pro Series Intake Manifold or Make Adjustments to Intake Manifold Throttle Body Flange to Match Bore and Keep IAC (Idle Air Control) Passage Separate. Not compatible with D Series engines featuring down-flow intake manifolds. Manual Transmission Only.

 

Fits F20C but NOT the F22C

Additional information

Weight 3 lbs
Dimensions 7 × 6 × 4 in
Brand

Skunk2

Reviews

There are no reviews yet.

Be the first to review “Pro 74mm Throttle Body – B/D/F/H Series – Black”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsPro 74mm Throttle Body - B/D/F/H Series - Black removePro 68mm Throttle Body - Evo VIII-IX removePro Intake Manifold - B16/B17/B18C5 - Black removeUltra Street Intake Manifold - B VTEC - Black removeFuel Rail - Ultra Race - B Series Secondary removeSkunk2 Pro Intake Manifold - B16/B17/B18C5 remove
ImagePro 74mm Throttle Body – B/D/F/H Series – BlackPro 74mm Throttle Body – B/D/F/H Series – BlackPro 74mm Throttle Body – B/D/F/H Series – BlackPro 74mm Throttle Body – B/D/F/H Series – BlackPro 74mm Throttle Body – B/D/F/H Series – BlackPro 74mm Throttle Body – B/D/F/H Series – Black
SKU309-05-0065309-06-0001307-05-0295307-05-0505350-05-6010307-05-0290
Rating
Price $262.99 $262.99 $283.99 $462.99 $188.99 $262.99
Stock
Availability
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionFEATURES: CNC Machined from Forged Billet 6061-T6 Aluminum Hard Anodized for Corrosion Resistance and Durability Precision Machined Brass Throttle Plate Compatible w/ OEM Throttle Cable Sealed Ball Bearings for Smooth Operation New Throttle Body Gasket and HardwareSkunk2 is proud to introduce its 68mm Pro Series Throttle Body for Mitsubishi’s 4G63 Evo VII-IX engines. Skunk2’s Pro Series Throttle Bodies are designed to be used with Mitsubishi’s OEM intake tubing and intake manifold as well as Skunk2’s Pro Series Intake Manifold for bolt-on horsepower and torque gains by optimizing engine airflow.Limited-edition, Black Series finish. Ideal for turbocharged and naturally aspirated applications. 70mm throttle body opening can be port-matched up to 74mm.  307-05-0505 FEATURES: Modular 2pc. Design w/ Removable Plenum Rotatable Plenum Allows Driver-side or Passenger-Side Throttle Body Mounting 1.8L Plenum Volume
** Tapered 8.72" Long High-Velocity Runners w/ Raised Velocity Stack Entries Generously Cast Runner Walls for Porting
 74mm Throttle Body Opening Lightweight 356 Aluminum Alloy Construction 2 x 1/8" NPT and 2 x 1/4" NPT Accessory Ports Hi-Grade Mounting Hardware Thermal Gasket Included Fitment:
  • 1999 - 2000 Honda Civic (1.6L Si)
  • 1994 - 1995 Honda Del Sol (1.6L VTEC)
  • 1992 - 2001 Acura Integra (1.8L GS-R/Type R)
Will NOT work with factory throttle body A minimum of a 68mm throttle body is required.   **Optional Billet Aluminum Plenum Spacer Available in .5L Size  
350-05-6010 Engineers at Skunk2 Racing have developed a Secondary Fuel Rail for the popular Ultra Race Intake Manifold. FEATURES: Manufactured from Billet 6061 Aluminum Hard Anodized for Corrosion Resistance Large .669" Internal Bore -8 ORB Ports Supports Up to 1,200HP Compatible w/ E85 and Methanol. Requires Remote Mount Regulator.307-05-0290 Ideal for turbocharged and naturally aspirated applications. 70mm throttle body opening can be port-matched up to 74mm.
ContentSkunk2 is proud to introduce the 74mm Pro Series Throttle Body for Honda B16/ B17/ B18/ B20/ D15/ D16/ F20/ F22/ F23/ H22 and H23 engines found in a number of chassis from 1988-2005. A larger throttle body is key to producing additional power throughout the powerband on modified engines with increased airflow demands and the Skunk2’s 74mm Pro Series Throttle Body delivers! Sealed ball bearings, a precision machined throttle plate and a honed oversized bore insures smooth operation on the most aggressive naturally aspirated and forced induction applications.
  • 1990 - 1997 Honda Accord (2.4L DX/LX/EX/SE)
  • 1992 - 2000 Honda Civic (1.6L CX/DX/EX/GX/HX/LX/Si)
  • 1993 - 1997 Honda Del Sol (1.6L S/Si/VTEC)
  • 1992 - 2001 Honda Prelude (2.2L Base/Type SH)
  • 2000 - 2009 Honda S2000 (2.2L F22C)
  • 1990 - 2001 Acura Integra (1.8L GS/GS-R/LS/Type R)
NOTE: Due to Larger Diameter... You Must Use A Skunk2 Pro Series Intake Manifold or Make Adjustments to Intake Manifold Throttle Body Flange to Match Bore and Keep IAC (Idle Air Control) Passage Separate. Not compatible with D Series engines featuring down-flow intake manifolds. Manual Transmission Only.   Fits F20C but NOT the F22C
Skunk2 is proud to introduce its 68mm Pro Series Throttle Body for the Evo VIII-IX in its exclusive hard anodized finish. Skunk2’s Pro Series Throttle Bodies are designed to be used with Mitsubishi’s OEM intake tubing and intake manifold as well as Skunk2’s Pro Series Intake Manifold for bolt-on horsepower and torque gains by optimizing engine airflow. Skunk2 throttle bodies undergo an extensive design and testing process to produce a throttle body that doesn't just provide more flow but retains smooth drivability and OEM throttle characteristics. Each Pro Series Throttle Body is designed using the latest CAE (Computer Aided Engineering) tools, which results in a unit that exceeds industry standards. Pro Series Throttle Bodies are also CNC machined from forged, billet 6061-T6 aluminum and hard anodized for durability in Skunk2’s signature finish. Additionally, Skunk2’s unique design relocates the MAP sensor underneath and eliminates the OEM water passages for cooler operation and a cleaner appearance. Pro Series Throttle Bodies are also compatible with OEM throttle cables, which simplifies installation. Each Skunk2 Pro Series Throttle body also features sealed bearings for smooth operation and a genuine, integrated Skunk2 badge. All necessary hardware and a new throttle body gasket are included for trouble-free installation. A larger throttle body is key to producing additional power throughout the powerband on turbocharged engines with increased airflow demands. Skunk2 recognized the Evo’s highly restrictive throttle body and developed the largest bore unit that remains compatible with the OEM intake manifold. Skunk2’s Pro Series Throttle Bodies for Evo engines feature a 68mm bore, which results in an increase of more than eight hp throughout the powerband.More than a decade ago, Skunk2’s engineers looked to the popular Integra Type R intake manifold for inspiration and went back to the drawing board. Skunk2’s Pro Series Intake Manifold in its signature Black Series finish for Honda's B-series VTEC engines (non-GS-R) features a larger plenum and oversized runners when compared to the ITR manifold for maximum horsepower and torque gains. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, the Pro Series manifold was designed for the “street enthusiast” who wants more power but doesn’t want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains. Skunk2’s cast-aluminum Pro Series Intake Manifolds for Honda’s B-series engines are a direct-fit replacement for all B-series engines thanks to three separate flange designs and are compatible with all factory sensors and throttle bodies as large as 75mm. Pro Series Intake Manifolds offer horsepower and torque gains greater than competitors’ manifolds but without compromising mid-range power output. The design incorporates specially tapered runners as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined to best match the cylinder head’s ports. Skunk2’s Pro Series Intake Manifold’s shape and design also increases wave scavenging effects at the engine’s ideal operating range, which allow for a broad increase in usable power. Skunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2’s Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality. Each manifold is molded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out and features a genuine Skunk2 nameplate.    The much anticipated Ultra "Street" intake manifolds for the Honda B16A/ B17A and B18C engine or VTEC cylinder heads has finally arrived! The Ultra Series is years of research and development, culminated in a multi-piece cast aluminum intake manifold that offers advantages that only a modular design could allow. Using the latest in CFD (Computational Fluid Dynamics) software; Skunk2 Racing has created a two-piece modular design that allows for easy disassembly, porting, and plenum volume changes through the use of a removable plenum lid and optional plenum spacers. In addition to CFD testing, the Ultra Series Intake Manifold has undergone extensive in-house dyno testing which has led to a design that is less restrictive, yielding both torque and power gains well over many of the competitors. Skunk2 Racing Ultra Street Intake Manifolds are cast-aluminum, manufactured from high-grade 356 aluminum alloy for strength and lightweight. Each manifold is CNC-machined for a precise fit, and individually inspected for quality assurance. The Ultra Series Street manifold features a generous 74mm throttle body opening and is constructed with thick walls at entry, minimizing concerns of breakthrough when port matching. Intense planning and design went into the plenum to distribute even airflow to all four cylinders under dynamic load conditions. Placement and design of the velocity stacks were rigorously flow tested to ensure maximum delivery of air to the cylinder. Large velocity stack raised bell mouth entries lead to 8.72” long intake runners with smooth transitions allowing the Ultra Street Intake Manifold to really move some air! Skunk2 Racing Ultra Street Intake Manifolds are designed to be used in modified naturally aspirated applications as well as mild turbo/supercharged setups.Fitment:
  • 1999 - 2000 Honda Civic (1.6L Si)
  • 1994 - 1997 Honda Del Sol (1.6L VTEC)
  • 1992 - 2001 Acura Integra (1.8L GS/GS-R/LS/Type R)
More than a decade ago, Skunk2’s engineers looked to the popular Integra Type R intake manifold for inspiration and went back to the drawing board. Skunk2’s Pro Series Intake Manifold for Honda's B-series VTEC engines (non-GS-R) features a larger plenum and oversized runners when compared to the ITR manifold for maximum horsepower and torque gains. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, the Pro Series manifold was designed for the “street enthusiast” who wants more power but doesn’t want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains. Skunk2’s cast-aluminum Pro Series Intake Manifolds for Honda’s B-series engines are a direct-fit replacement for all B-series engines thanks to three separate flange designs and are compatible with all factory sensors and throttle bodies as large as 75mm. Pro Series Intake Manifolds offer horsepower and torque gains greater than competitors’ manifolds but without compromising mid-range power output. The design incorporates specially tapered runners as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined to best match the cylinder head’s ports. Skunk2’s Pro Series Intake Manifold’s shape and design also increases wave scavenging effects at the engine’s ideal operating range, which allow for a broad increase in usable power. Skunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2’s Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality. Each manifold is molded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out and features a genuine Skunk2 nameplate.    
Weight33151.25
Dimensions7 × 6 × 4 in7 × 6 × 4 inN/A20 × 16 × 9 in16 × 5 × 3 inN/A
Additional information
Weight 3 lbs
Dimensions 7 × 6 × 4 in
Brand

Skunk2

Weight 3 lbs
Dimensions 7 × 6 × 4 in
Brand

Skunk2

Brand

Skunk2

Weight 15 lbs
Dimensions 20 × 16 × 9 in
Brand

Skunk2

Weight 1.25 lbs
Dimensions 16 × 5 × 3 in
Brand

Skunk2

Brand

Skunk2

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
Compare ×
Let's Compare! Continue shopping
X