96-02 MK-SYN115-3 Carbon Master Kit H23 F22 F23 Prelude/Accord
$682.45
Description
Fitting: P2A5 P2U5 P2A8 M2L5 M2S4 M2J4 M2J5 (1996-2002 models with 3 piece dual cone 2nd synchro and 7.5mm thick 3-4 fork)
Note: **Will not fit 92-95 model with 6.5mm fork. Early models may also have a single piece 2nd synchro, please verify your design or call for assistance.
Included: 1-5 Pro-Series Carbon Lined Synchros, 1-5 synchro springs, brass reverse synchro and spring, 1-5 slider sleeves, 5 shaft bearings, 2 axle seals, input seal, shift rod seal, and a new dust boot.
Additional information
| Weight | 12 lbs |
|---|---|
| Dimensions | 1 × 1 × 1 in |
| Brand | Synchrotech |
Quick Comparison
| Settings | 96-02 MK-SYN115-3 Carbon Master Kit H23 F22 F23 Prelude/Accord remove | BSK-SYN101B Brass Rebuild Kit (GSR ITR B16) remove | K-Tuned CMC Upgrade Kit remove | 89-91 MK-SYN103 Carbon Master Kit Y1 S1 remove | 94-01 MK-SYN107 Carbon Master Kit Integra LS remove | MK-SYN101B Brass Master Kit (GSR ITR B16) remove | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | 96-02 MK-SYN115-3 Carbon Master Kit H23 F22 F23 Prelude/Accord remove | BSK-SYN101B Brass Rebuild Kit (GSR ITR B16) remove | K-Tuned CMC Upgrade Kit remove | 89-91 MK-SYN103 Carbon Master Kit Y1 S1 remove | 94-01 MK-SYN107 Carbon Master Kit Integra LS remove | MK-SYN101B Brass Master Kit (GSR ITR B16) remove | ||||||||||||||||||||||||||||||||||||
| Image |  |  |  |  |  |  | ||||||||||||||||||||||||||||||||||||
| SKU | MK-SYN115-3 | BSK-SYN101B | KTD-CMC-LHD | MK-SYN103 | MK-SYN107 | MK-SYN101B | ||||||||||||||||||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||||||||||||||||||
| Price | $682.45 | $367.45 | $189.99 | $629.95 | $734.95 | $682.45 | ||||||||||||||||||||||||||||||||||||
| Stock | ||||||||||||||||||||||||||||||||||||||||||
| Availability | ||||||||||||||||||||||||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||||||||||||||||||
| Description | ||||||||||||||||||||||||||||||||||||||||||
| Content | Fitting: P2A5 P2U5 P2A8 M2L5 M2S4 M2J4 M2J5 (1996-2002 models with 3 piece dual cone 2nd synchro and 7.5mm thick 3-4 fork) Note: **Will not fit 92-95 model with 6.5mm fork. Early models may also have a single piece 2nd synchro, please verify your design or call for assistance. Included: 1-5 Pro-Series Carbon Lined Synchros, 1-5 synchro springs, brass reverse synchro and spring, 1-5 slider sleeves, 5 shaft bearings, 2 axle seals, input seal, shift rod seal, and a new dust boot. | Fitting: Y80 S80 S4C S21 Y21 (B16A/B16B/B18C) Included: 1-5 Brass Synchros, 1-5 synchro springs, brass reverse synchro and spring, 5 shaft bearings, bearing clip, 2 axle seals, input seal, shift rod seal, and a new dust boot. | RHD applications maybe be available, please inquire
The 2002-2006 RSX, 2002-2005 EP3, 2006-2011 8th Gen Civic Si, 2012-2015 Civic Si, and 2004-2008 Acura TSX all have a known issue with their factory clutch master cylinders (CMC). If you look at the CMC on these cars more closely, you'll notice that all of these models have a triangular shaped feedback plate positioned at the very end of the cylinder. This plate is basically a secondary valve that was designed to slow down the clutch engagement and reduce shock to the clutch itself and the surrounding drivetrain parts. This setup might be perfectly fine for people that just drive their cars for simple daily use, but the delayed engagement can cause wear to the synchros and possibly even the gears on performance applications. The reason is fairly simple, the factory CMC delays the clutch operation, so it does not open fast enough to keep up with a fast shift. This means that pressure is being applied to the transmission synchros during the shift, before they are ready for the actual gear change.
The K-Tuned Clutch Master Cylinder Upgrade Kit was designed to completely replace the original factory cylinder and offer real time clutch engagement to support faster shifting. We have put together a complete bolt-on kit that includes a direct replacement CMC, our high pressure 3AN clutch line, plus all of the necessary fittings needed for installation. The factory clutch fluid reservoir is reused and connected the same way it was in stock form. The only thing we suggest is checking out your slave cylinder on the trans to confirm it is leak free. Aside from that, installation is pretty simple, install the parts and bleed the system using some new clutch fluid | Fitting: 1989-1991 Cable Y1/ S1 Transmissions Included: 1-5 Carbon Synchros, 1-5 Slider Sleeves, 4 shaft bearings, 2 axle seals, input seal, shift rod seal, and a new dust boot | Fitting: Y80 S80 Integra LS GS RS 1994-2001 Included: 1-5 Carbon Synchros, 1-5 Slider Sleeves, 5 shaft bearings, bearing clip, 2 axle seals, input seal, shift rod seal, and a new dust boot. | Fitting: Y80 S80 S4C S21 Y21 (B16A/B16B/B18C) Included: 1-5 Brass Synchros, 1-5 synchro springs, brass reverse synchro and spring, 1-5 Slider Sleeves, 5 shaft bearings, bearing clip, 2 axle seals, input seal, shift rod seal, and a new dust boot. | ||||||||||||||||||||||||||||||||||||
| Weight | 12 lbs | 12 lbs | 1.15 lbs | 12 lbs | 12 lbs | 12 lbs | ||||||||||||||||||||||||||||||||||||
| Dimensions | 1 × 1 × 1 in | 1 × 1 × 1 in | 8 × 4 × 5 in | 1 × 1 × 1 in | 1 × 1 × 1 in | 1 × 1 × 1 in | ||||||||||||||||||||||||||||||||||||
| Additional information |
|
|
|
|
|
|
Reviews
There are no reviews yet.