3.070 1st Gear (JDM/EDM B18C ’98 Spec)
$278.95
Achieve the ultimate in acceleration with the MFactory Close Ratio Gears. After installing our gears, you will experience a phenomenal increase in acceleration despite a lower top speed.
Description
Diamond Cut to exacting tolerances from Forged High-Nickel-Chromium-Molybdenum Steel
Perfect fitment & finish ensures hassle-free installation & maintenance, each and every time
Designed using leading-edge Solidworks 3D CAD & Cosmos FEA software
Advanced Gear Geometry minimizes parasitic drivetrain losses. Race transmissions built with MFactory components transfer, on average, 1-2% more power to the ground over our competitors!
Dual-Cone Carbon-Composite Synchro Technology for Honda B-Series
An Industry First! Taking 21st Century technology from the Honda K-Series and applying it to the Honda B-Series, this ensures quicker and more precise shifting at higher rpm’s in 3rd & 4th Gears
Additional information
| Weight | 12 lbs |
|---|---|
| Dimensions | 1 × 1 × 1 in |
| Brand | MFactory |
Quick Comparison
| Settings | 3.070 1st Gear (JDM/EDM B18C '98 Spec) remove | 89-91 MK-SYN105B Brass Master Kit Y2 A1 J1 remove | K-Tuned K-Series Complete CMC & Slave Kit remove | 89-91 MK-SYN103B Brass Master Kit Y1 S1 remove | 89-91 MK-SYN105 Carbon Master Kit Y2 A1 J1 remove | 92-93 BSK-SYN101B-YS1 Brass Rebuild Kit GSR Cable remove | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Image |  |  |  |  |  |  | ||||||||||||||||||||||||||||||||||||
| SKU | MF-TRS-01BA | MK-SYN105B | KTD-CLK-KMS | MK-SYN103B | MK-SYN105 | BSK-SYN101B-YS1 | ||||||||||||||||||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||||||||||||||||||
| Price | $278.95 | $577.45 | $249.99 | $577.45 | $629.95 | $367.45 | ||||||||||||||||||||||||||||||||||||
| Stock | ||||||||||||||||||||||||||||||||||||||||||
| Availability | ||||||||||||||||||||||||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||||||||||||||||||
| Description | Achieve the ultimate in acceleration with the MFactory Close Ratio Gears. After installing our gears, you will experience a phenomenal increase in acceleration despite a lower top speed. | Applications:
| ||||||||||||||||||||||||||||||||||||||||
| Content | Diamond Cut to exacting tolerances from Forged High-Nickel-Chromium-Molybdenum Steel Perfect fitment & finish ensures hassle-free installation & maintenance, each and every time Designed using leading-edge Solidworks 3D CAD & Cosmos FEA software Advanced Gear Geometry minimizes parasitic drivetrain losses. Race transmissions built with MFactory components transfer, on average, 1-2% more power to the ground over our competitors! Dual-Cone Carbon-Composite Synchro Technology for Honda B-Series An Industry First! Taking 21st Century technology from the Honda K-Series and applying it to the Honda B-Series, this ensures quicker and more precise shifting at higher rpm's in 3rd & 4th Gears | Fitting: 1989-1991 Cable Y2/A1/J1 Transmissions (54mm ID 3-4 synchros) Included: 1-5 Brass Synchros, 1-5 Slider Sleeves, 4 shaft bearings, 2 axle seals, input seal, shift rod seal, and a new dust boot | The 2002-2006 RSX, 2002-2005 EP3, 2006-2011 8th Gen Civic Si, 2012-2015 Civic Si, and 2004-2008 Acura TSX all have a known issue with their factory clutch master cylinders (CMC). If you look at the CMC on these cars more closely, you'll notice that all of these models have a triangular shaped feedback plate positioned at the very end of the cylinder. This plate is basically a secondary valve that was designed to slow down the clutch engagement and reduce shock to the clutch itself and the surrounding drivetrain parts. This setup might be perfectly fine for people that just drive their cars for simple daily use, but the delayed engagement can cause wear to the synchros and possibly even the gears on performance applications. The reason is fairly simple, the factory CMC delays the clutch operation, so it does not open fast enough to keep up with a fast shift. This means that pressure is being applied to the transmission synchros during the shift, before they are ready for the actual gear change. The K-Tuned Clutch Master Cylinder Upgrade Kit was designed to completely replace the original factory cylinder and offer real time clutch engagement to support faster shifting. We have put together a complete bolt-on kit that includes a direct replacement CMC, our high pressure 3AN clutch line, plus all of the necessary fittings needed for installation. The factory clutch fluid reservoir is reused and connected the same way it was in stock form. The only thing we suggest is checking out your slave cylinder on the trans to confirm it is leak free. Aside from that, installation is pretty simple, install the parts and bleed the system using some new clutch fluid. | Fitting: 1989-1991 Cable Y1/ S1 Transmissions Included: 1-5 Brass Synchros, 1-5 Slider Sleeves, 4 shaft bearings, 2 axle seals, input seal, shift rod seal, and a new dust boot | Fitting: 1989-1991 Cable Y2/A1/J1 Transmissions (54mm ID 3-4 synchros) Included: 1-5 Carbon Synchros, 1-5 Slider Sleeves, 4 shaft bearings, 2 axle seals, input seal, shift rod seal, and a new dust boot | Fitting: YS1 Cable GSR Trans 1992-1993 Included: 1-5 Brass Synchros, 5 shaft bearings, bearing clip, 2 axle seals, input seal, shift rod seal, and a new dust boot. | ||||||||||||||||||||||||||||||||||||
| Weight | 12 | 12 | 1.15 | 12 | 12 | 12 | ||||||||||||||||||||||||||||||||||||
| Dimensions | 1 × 1 × 1 in | 1 × 1 × 1 in | 8 × 4 × 5 in | 1 × 1 × 1 in | 1 × 1 × 1 in | 1 × 1 × 1 in | ||||||||||||||||||||||||||||||||||||
| Additional information |
|
|
|
|
|
|
Reviews
There are no reviews yet.