Lun - Sab 9:00 am - 5:00 pm

HomeShopForced InductionBlow Off ValvesTurbosmart Kompact Shortie Plumb Back BOV – Ford Fiesta ST/Ford Fusion EcoBoost 1.6L
Save $23

Turbosmart Kompact Shortie Plumb Back BOV – Ford Fiesta ST/Ford Fusion EcoBoost 1.6L

$206.99

 

 

Ford Fiesta ST 1.6L EcoBoost

 

Supplied With:
 
Kompact Shortie Plumb Back BOV
Boost Reference Adapter
All Necessary Plumbing
Resister Pack for Factory Valve Plug.

Description

This little blow-off valve might look small, but it’s anything but light on performance. With its billet aluminum construction and a light-weight brass/aluminum two-piece piston, which is then perfectly matched with precision engineered springs, the Shortie provides razor sharp boost response and significantly greater boost handling abilities, up to a massive 30PSI. The Plumb Back is a fully recirculating BOV, so its operation is quiet and won’t draw any unwanted attention. It seamlessly integrates with the vehicle’s standard mapping, so it’s perfect for the driver seeking big performance from their ST while keeping under the radar.

Like the Dual Port, the Plumb Back Shortie is a direct replacement for the Fiesta’s standard plastic blow-off valve, which can leak and crack, especially under increased boost pressure. The Shortie is a far more durable replacement, and it bolts right up to the Ford’s turbo compressor cover, letting you turn up your Fiesta’s performance without costly custom work.

Additional information

Weight 0.8 lbs
Dimensions 4.8 × 3.5 × 3.3 in
Brand

Turbosmart

Reviews

There are no reviews yet.

Be the first to review “Turbosmart Kompact Shortie Plumb Back BOV – Ford Fiesta ST/Ford Fusion EcoBoost 1.6L”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsTurbosmart Kompact Shortie Plumb Back BOV - Ford Fiesta ST/Ford Fusion EcoBoost 1.6L removeUltra Race Plenum Spacer - 1L Black removeSkunk2 Pro Intake Manifold - B16/B17/B18C5 removeK Series Fuel Rail for Ultra Street and Ultra Race Manifolds - Primary and Secondary removeSkunk2 Ultra Street Intake Manifold - K20A2 Style - Black removePro Intake Manifold - B16/B17/B18C5 - Black remove
ImageTurbosmart Kompact Shortie Plumb Back BOV – Ford Fiesta ST/Ford Fusion EcoBoost 1.6LTurbosmart Kompact Shortie Plumb Back BOV – Ford Fiesta ST/Ford Fusion EcoBoost 1.6LTurbosmart Kompact Shortie Plumb Back BOV – Ford Fiesta ST/Ford Fusion EcoBoost 1.6LTurbosmart Kompact Shortie Plumb Back BOV – Ford Fiesta ST/Ford Fusion EcoBoost 1.6LTurbosmart Kompact Shortie Plumb Back BOV – Ford Fiesta ST/Ford Fusion EcoBoost 1.6LTurbosmart Kompact Shortie Plumb Back BOV – Ford Fiesta ST/Ford Fusion EcoBoost 1.6L
SKUTS-0203-1266907-05-9051307-05-0290350-05-7000307-05-0605307-05-0295
Rating
Price $206.99 $141.99 $262.99 $188.99 $578.99 $283.99
Stock
Availability
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description    Ford Fiesta ST 1.6L EcoBoost  
Supplied With:
 
Kompact Shortie Plumb Back BOV
Boost Reference Adapter
All Necessary Plumbing
Resister Pack for Factory Valve Plug.
907-05-9051 The Skunk2 Racing Plenum Spacer is used to increase the internal volume of the Ultra "Race" Intake Manifolds by 1 Liter. INCLUDES: Billet Aluminum Spacer Longer Socket Head Hardware Gaskets307-05-0290 Ideal for turbocharged and naturally aspirated applications. 70mm throttle body opening can be port-matched up to 74mm.350-05-7000 FEATURES: Manufactured from Billet 6061 Aluminum Hard Anodized for Corrosion Resistance Large .669" Internal Bore -8 ORB Ports Supports 1,200+ HP307-05-0605 FEATURES: Modular 2pc. Design w/ Removable Plenum Rotatable Plenum Allows Driver-side or Passenger-Side Throttle Body Mounting 1.8L Plenum Volume
** Tapered 6.85" Long High-Velocity Runners w/ Raised Velocity Stack Entries Generously Cast Runner Walls for Porting 71mm Throttle Body Opening Lightweight 356 Aluminum Alloy Construction Hi-Grade Mounting Hardware Thermal Gasket Included 2 x 1/4" NPT and 2 x 1/8" NPT Accessory Ports   **Optional Billet Aluminum Plenum Spacer Available in .5L Size  Limited-edition, Black Series finish. Ideal for turbocharged and naturally aspirated applications. 70mm throttle body opening can be port-matched up to 74mm.  
ContentThis little blow-off valve might look small, but it’s anything but light on performance. With its billet aluminum construction and a light-weight brass/aluminum two-piece piston, which is then perfectly matched with precision engineered springs, the Shortie provides razor sharp boost response and significantly greater boost handling abilities, up to a massive 30PSI. The Plumb Back is a fully recirculating BOV, so its operation is quiet and won’t draw any unwanted attention. It seamlessly integrates with the vehicle’s standard mapping, so it’s perfect for the driver seeking big performance from their ST while keeping under the radar. Like the Dual Port, the Plumb Back Shortie is a direct replacement for the Fiesta’s standard plastic blow-off valve, which can leak and crack, especially under increased boost pressure. The Shortie is a far more durable replacement, and it bolts right up to the Ford’s turbo compressor cover, letting you turn up your Fiesta’s performance without costly custom work.More than a decade ago, Skunk2’s engineers looked to the popular Integra Type R intake manifold for inspiration and went back to the drawing board. Skunk2’s Pro Series Intake Manifold for Honda's B-series VTEC engines (non-GS-R) features a larger plenum and oversized runners when compared to the ITR manifold for maximum horsepower and torque gains. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, the Pro Series manifold was designed for the “street enthusiast” who wants more power but doesn’t want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains. Skunk2’s cast-aluminum Pro Series Intake Manifolds for Honda’s B-series engines are a direct-fit replacement for all B-series engines thanks to three separate flange designs and are compatible with all factory sensors and throttle bodies as large as 75mm. Pro Series Intake Manifolds offer horsepower and torque gains greater than competitors’ manifolds but without compromising mid-range power output. The design incorporates specially tapered runners as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined to best match the cylinder head’s ports. Skunk2’s Pro Series Intake Manifold’s shape and design also increases wave scavenging effects at the engine’s ideal operating range, which allow for a broad increase in usable power. Skunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2’s Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality. Each manifold is molded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out and features a genuine Skunk2 nameplate.    We’ve streamlined the process and revised the design of the K Series Ultra Fuel (350-05-7000) to replace the Ultra Fuel Rails listed below. The Skunk2 Racing K Fuel Rail is the perfect compliment to the Ultra Street Manifold and especially the Ultra Race Intake Manifold with its dual injector positions. This K-Series Fuel Rail is used for both the primary injector position and the secondary injector position. One rail, two positions. REPLACES THESE PREVIOUS FUEL RAILS: • 350-05-6050 DISC- K ULTRA RACE PRIMARY BLACK • 350-05-6055 DISC - K ULTRA STREET FUEL RAIL • 350-05-6060 DISC- K ULTRA RACE SECONDARY BLACK • 350-05-6070 DISC- S2K ULTRA RACE SECONDARY BLACK FEATURES: Manufactured from Billet 6061 Aluminum Hard Anodized for Corrosion Resistance Large .669" Internal Bore -8 ORB Ports Supports 1,200+ HP -8 ORB Ports = 3/4"-16 SAE O-Ring Boss PortsThe much anticipated Ultra "Street" Intake Manifold for the '02-'05 Civic Si and '02-'06 RSX/ RSX Type S, and/ or any swap using the K20A/ K20A2/ K20Z1/ K24A1 engines or cylinder heads has finally arrived!   The Ultra Series is years of research and development, culminated in a multi-piece cast aluminum intake manifold that offers advantages that only a modular design could allow. Using the latest in CFD (Computational Fluid Dynamics) software; Skunk2 Racing has created a two-piece modular design that allows for easy disassembly, porting, and plenum volume changes through the use of a removable plenum lid and optional plenum spacers. In addition to CFD testing, the Ultra Series Intake Manifold has undergone extensive in-house dyno testing which has led to a design that is less restrictive, yielding both torque and power gains well over many of the competitors.   Skunk2 Racing Ultra Street Intake Manifolds are cast-aluminum, manufactured from high-grade 356 aluminum alloy for strength and lightweight. Each manifold is CNC-machined for a precise fit, and individually inspected for quality assurance. The Ultra Series Street manifold features a generous 71mm throttle body opening and is constructed with thick walls at entry, minimizing concerns of breakthrough when port matching. Intense planning and design went into the plenum to distribute even airflow to all four cylinders under dynamic load conditions. Placement and design of the velocity stacks were rigorously flow tested to ensure maximum delivery of air to the cylinder. Large velocity stack raised bell mouth entries lead to 6.85” long intake runners with smooth transitions allowing the Ultra Street Intake Manifold to really move some air! Skunk2 Racing Ultra Street Intake Manifolds are designed to be used in modified naturally aspirated applications as well as mild turbo/supercharged setups.More than a decade ago, Skunk2’s engineers looked to the popular Integra Type R intake manifold for inspiration and went back to the drawing board. Skunk2’s Pro Series Intake Manifold in its signature Black Series finish for Honda's B-series VTEC engines (non-GS-R) features a larger plenum and oversized runners when compared to the ITR manifold for maximum horsepower and torque gains. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, the Pro Series manifold was designed for the “street enthusiast” who wants more power but doesn’t want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains. Skunk2’s cast-aluminum Pro Series Intake Manifolds for Honda’s B-series engines are a direct-fit replacement for all B-series engines thanks to three separate flange designs and are compatible with all factory sensors and throttle bodies as large as 75mm. Pro Series Intake Manifolds offer horsepower and torque gains greater than competitors’ manifolds but without compromising mid-range power output. The design incorporates specially tapered runners as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined to best match the cylinder head’s ports. Skunk2’s Pro Series Intake Manifold’s shape and design also increases wave scavenging effects at the engine’s ideal operating range, which allow for a broad increase in usable power. Skunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2’s Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality. Each manifold is molded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out and features a genuine Skunk2 nameplate.    
Weight0.83315
Dimensions4.8 × 3.5 × 3.3 in20 × 8 × 8 inN/A18 × 6 × 6 in20 × 16 × 9 inN/A
Additional information
Weight 0.8 lbs
Dimensions 4.8 × 3.5 × 3.3 in
Brand

Turbosmart

Weight 3 lbs
Dimensions 20 × 8 × 8 in
Brand

Skunk2

Brand

Skunk2

Weight 3 lbs
Dimensions 18 × 6 × 6 in
Brand

Skunk2

Weight 15 lbs
Dimensions 20 × 16 × 9 in
Brand

Skunk2

Brand

Skunk2

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
Compare ×
Let's Compare! Continue shopping
X