Lun - Sab 9:00 am - 5:00 pm

HomeShopFuel SystemInjectorsID1700-XDSToyotaSupra Turbo 93-98 2JZ-GTE (14mm)| ID1700-XDS

Supra Turbo 93-98 2JZ-GTE (14mm)| ID1700-XDS

$1,827.00$1,902.60

ID1700-XDS, for Supra Turbo 1993-1998 / 2JZ-GTE applications. Currently top fed. 14mm (purple) top. Set of 6.

Nominal Flow Rate – 1725cc/min @ 3.0 Bar (43.5 psi) Using Iso-Octane at 52 Degrees C (125 Degrees F)
Maximum Differential Fuel Pressure – 7.0 Bar (101.5 psi)
Fuel Compatibility – Compatible with Methanol/Ethanol/All Known Hydrocarbon Fuels.
Electrical Connector – USCAR

SKU: 1700.60.14.14.6|Supra Turbo 93-98 2JZ-GTE (14mm) Category: Tags: , , , ,

Description

The ID1700-XDS was designed to fill the gap between the ID1300-XDS and the ID2600-XDS, and like both, it features corrosion resistant internals making it compatible with all known automotive fuels.

A unique magnetic circuit, resulting from a lengthy development program, makes the ID1700-XDS immune to voltage and pressure sensitivity problems that plague other high impedance high flow injectors. The ID1700-XDS excels at high pressures typical of current automotive systems, and will perform flawlessly in these applications.

Application Notes

The ID1700-XDS was designed to be an all fuel compatible injector, capable of very high flow rates. As such, it will most often be used to deliver E85 to boosted engines, or occasionally, gasoline in extreme high horsepower applications. Neither of these applications requires extended linearity at low flow rates, and so this was given a proportionately lower priority during the design process.

The ID1700-XDS will deliver flawless stoichiometric idle and cruise mixtures on E85, but like the ID2600-XDS, should not be expected to do so on gasoline.

If you need flawless drivability on gasoline, the ID1300-XDS will provide this, and is capable of approximately 150hp per injector on E85.

Additional information

Weight 12 lbs
Dimensions 1 × 1 × 1 in
Brand

Injector Dynamics

Reviews

There are no reviews yet.

Be the first to review “Supra Turbo 93-98 2JZ-GTE (14mm)| ID1700-XDS”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsSupra Turbo 93-98 2JZ-GTE (14mm)| ID1700-XDS removePro Intake Manifold - K20Z3 Style - Black removeUltra Race Plenum Spacer - 1L Black removeUltra Street Plenum Spacer - Black removeUltra Street Intake Manifold - B VTEC removeFuel Rail - Ultra Race - B Series Secondary remove
ImageSupra Turbo 93-98 2JZ-GTE (14mm)| ID1700-XDSSupra Turbo 93-98 2JZ-GTE (14mm)| ID1700-XDSSupra Turbo 93-98 2JZ-GTE (14mm)| ID1700-XDSSupra Turbo 93-98 2JZ-GTE (14mm)| ID1700-XDSSupra Turbo 93-98 2JZ-GTE (14mm)| ID1700-XDSSupra Turbo 93-98 2JZ-GTE (14mm)| ID1700-XDS
SKU1700.60.14.14.6|Supra Turbo 93-98 2JZ-GTE (14mm)307-05-0325907-05-9051907-05-9101307-05-0500350-05-6010
Rating
Price$1,827.00$1,902.60 $504.99 $141.99 $104.99 $410.99 $188.99
Stock
Availability
Add to cart

Select options

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionID1700-XDS, for Supra Turbo 1993-1998 / 2JZ-GTE applications. Currently top fed. 14mm (purple) top. Set of 6. Nominal Flow Rate – 1725cc/min @ 3.0 Bar (43.5 psi) Using Iso-Octane at 52 Degrees C (125 Degrees F) Maximum Differential Fuel Pressure – 7.0 Bar (101.5 psi) Fuel Compatibility – Compatible with Methanol/Ethanol/All Known Hydrocarbon Fuels. Electrical Connector – USCARIdeal for turbocharged and naturally aspirated applications. 72mm throttle body opening can be port-matched up to 76mm. Only compatible with '06-'11 Civic Si K-series engine.907-05-9051 The Skunk2 Racing Plenum Spacer is used to increase the internal volume of the Ultra "Race" Intake Manifolds by 1 Liter. INCLUDES: Billet Aluminum Spacer Longer Socket Head Hardware Gaskets907-05-9101 The Skunk2 Racing Plenum Spacer is used to increase the internal volume of the Ultra "Street" Intake Manifolds by .50 Liters. INCLUDES: .50L Billet Aluminum Spacer Longer Socket Head Hardware GasketsFEATURES: Modular 2pc. Design w/ Removable Plenum Rotatable Plenum Allows Driver-side or Passenger-Side Throttle Body Mounting 1.8L Plenum Volume
** Tapered 8.72" Long High-Velocity Runners w/ Raised Velocity Stack Entries Generously Cast Runner Walls for Porting
 74mm Throttle Body Opening Lightweight 356 Aluminum Alloy Construction 2 x 1/8" NPT and 2 x 1/4" NPT Accessory Ports Hi-Grade Mounting Hardware Thermal Gasket Included Will not work with factory throttle body. A minimum of a 68mm throttle body is required.350-05-6010 Engineers at Skunk2 Racing have developed a Secondary Fuel Rail for the popular Ultra Race Intake Manifold. FEATURES: Manufactured from Billet 6061 Aluminum Hard Anodized for Corrosion Resistance Large .669" Internal Bore -8 ORB Ports Supports Up to 1,200HP Compatible w/ E85 and Methanol. Requires Remote Mount Regulator.
ContentThe ID1700-XDS was designed to fill the gap between the ID1300-XDS and the ID2600-XDS, and like both, it features corrosion resistant internals making it compatible with all known automotive fuels. A unique magnetic circuit, resulting from a lengthy development program, makes the ID1700-XDS immune to voltage and pressure sensitivity problems that plague other high impedance high flow injectors. The ID1700-XDS excels at high pressures typical of current automotive systems, and will perform flawlessly in these applications. Application Notes The ID1700-XDS was designed to be an all fuel compatible injector, capable of very high flow rates. As such, it will most often be used to deliver E85 to boosted engines, or occasionally, gasoline in extreme high horsepower applications. Neither of these applications requires extended linearity at low flow rates, and so this was given a proportionately lower priority during the design process. The ID1700-XDS will deliver flawless stoichiometric idle and cruise mixtures on E85, but like the ID2600-XDS, should not be expected to do so on gasoline. If you need flawless drivability on gasoline, the ID1300-XDS will provide this, and is capable of approximately 150hp per injector on E85.Skunk2's engineers went back to the drawing board when they set out to improve the already popular '06-'11 Civic Si’s RBC intake manifold. Each of Skunk2’s Pro Series Intake Manifolds for Honda’s K-series engines feature larger plenums and shorter, oversized runners when compared to the RBC, and are cast with thicker wall material, leaving room for further porting for high-horsepower applications. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, Pro Series manifolds were designed for the “street enthusiast” who wants more power but doesn’t want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains. Skunk2’s all-new, cast-aluminum Pro Series Intake Manifolds for Honda’s K-series engines are a direct-fit replacement for all '06-'11 Civic Si engines thanks to their unique design and throttle body flanges, which are compatible with OEM throttle bodies as well as those as large as 76mm. A thermal-insulated intake manifold gasket is also included, making for a truly bolt-on installation (no drilling or modifying required). Pro Series manifolds also incorporate an angled-runner design, which allows for ample hood clearance on almost any engine combination. Pro Series Intake Manifolds offer horsepower and torque gains greater than the popular RBC manifold but without compromising mid-range power output. The design incorporates runners that are similar in length to the RBC’s but with larger bores, a special tapered design, as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined and hand-finished to best match the cylinder head’s ports. Skunk2’s Pro Series Intake Manifold’s shape and design also increases wave scavenging effects at the engine’s ideal operating range, which allow for a broad increase in usable power. Skunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2’s Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality. Each manifold is molded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out and features a genuine Skunk2 nameplate.The much anticipated Ultra "Street" intake manifolds for the Honda B16A/ B17A and B18C engine or VTEC cylinder heads! The Ultra Series is years of research and development, culminated in a multi-piece cast aluminum intake manifold that offers advantages that only a modular design could allow. Using the latest in CFD (Computational Fluid Dynamics) software; Skunk2 Racing has created a two-piece modular design that allows for easy disassembly, porting, and plenum volume changes through the use of a removable plenum lid and optional plenum spacers. In addition to CFD testing, the Ultra Series Intake Manifold has undergone extensive in-house dyno testing which has led to a design that is less restrictive, yielding both torque and power gains well over many of the competitors. Skunk2 Racing Ultra Street Intake Manifolds are cast-aluminum, manufactured from high-grade 356 aluminum alloy for strength and lightweight. Each manifold is CNC-machined for a precise fit, and individually inspected for quality assurance. The Ultra Series Street manifold features a generous 74mm throttle body opening and is constructed with thick walls at entry, minimizing concerns of breakthrough when port matching. Intense planning and design went into the plenum to distribute even airflow to all four cylinders under dynamic load conditions. Placement and design of the velocity stacks were rigorously flow tested to ensure maximum delivery of air to the cylinder. Large velocity stack raised bell mouth entries lead to 8.72” long intake runners with smooth transitions allowing the Ultra Street Intake Manifold to really move some air! Skunk2 Racing Ultra Street Intake Manifolds are designed to be used in modified naturally aspirated applications as well as mild turbo/supercharged setups.Fitment:
  • 1999 - 2000 Honda Civic (1.6L Si)
  • 1994 - 1997 Honda Del Sol (1.6L VTEC)
  • 1992 - 2001 Acura Integra (1.8L GS/GS-R/LS/Type R)
Weight1233151.25
Dimensions1 × 1 × 1 inN/A20 × 8 × 8 in13 × 9 × 1 in20 × 16 × 9 in16 × 5 × 3 in
Additional information
Weight 12 lbs
Dimensions 1 × 1 × 1 in
Brand

Injector Dynamics

Brand

Skunk2

Weight 3 lbs
Dimensions 20 × 8 × 8 in
Brand

Skunk2

Weight 3 lbs
Dimensions 13 × 9 × 1 in
Brand

Skunk2

Weight 15 lbs
Dimensions 20 × 16 × 9 in
Brand

Skunk2

Weight 1.25 lbs
Dimensions 16 × 5 × 3 in
Brand

Skunk2

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
Compare ×
Let's Compare! Continue shopping
X