Lun - Sab 9:00 am - 5:00 pm

HomeShopFuel SystemInjectorsID1300-XDSToyotaSupra Turbo 93-98 2JZ-GTE (14mm)| ID1300-XDS

Supra Turbo 93-98 2JZ-GTE (14mm)| ID1300-XDS

$1,417.50$1,493.10

ID1300-XDS, for Supra Turbo 1993-1998 / 2JZ-GTE applications. Currently top fed. 14mm (purple) top. Set of 6.

Base Specifications

  • Nominal Flow Rate – 1340cc/min @ 3.0 Bar (43.5 psi) Using Iso Octane at 52 Degrees C (125 Degrees F)
  • Maximum Differential Fuel Pressure – 6.0 Bar (87.0 psi)
  • Fuel Compatibility – Compatible With All Known Fuels – (Designed Specifically for Alternative Fuels)
  • Electrical Connector – USCAR
SKU: 1300.60.14.14.6|Supra Turbo 93-98 2JZ-GTE (14mm) Category: Tags: , , , ,

Description

The ID1300 is an all new injector, designed in partnership with Bosch Motorsport. This collaboration has given us the ability to design a high flow injector with characteristics specific to the needs of the motorsport tuner. The ID1300 was designed with alternative fuels in mind, and is the only performance injector available with all stainless internals. It is compatibwle with all known fuels, and will stand up to the corrosive nature of alcohol better than any injector on the market.

While the ID1300 was designed with an eye towards ethanol fueled engines, we have accounted for the occasional need to convert back to gasoline. The ID1300 has a minimum fuel mass compatible with gasoline use, and will provide exceptional idle and cruise behavior under these conditions. In addition to its multi-fuel capabilities, the compact body of the ID1300 allows fitment in 200+ applications, making it the most versatile injector in our lineup. The 1300 has continued to be refined and improved over the years, and the 1300-XDS is the latest and best version to date.

Additional information

Weight 12 lbs
Dimensions 1 × 1 × 1 in
Brand

Injector Dynamics

Reviews

There are no reviews yet.

Be the first to review “Supra Turbo 93-98 2JZ-GTE (14mm)| ID1300-XDS”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsSupra Turbo 93-98 2JZ-GTE (14mm)| ID1300-XDS removeHigh Volume Fuel Rail Mitsubishi EVO VIII IX removeInlet Shield removePro Intake Manifold - K20A2 Style removePro Intake Manifold - K20Z3 Style removeAlpha 70mm Throttle Body - B/D/F/H Series remove
NameSupra Turbo 93-98 2JZ-GTE (14mm)| ID1300-XDS removeHigh Volume Fuel Rail Mitsubishi EVO VIII IX removeInlet Shield removePro Intake Manifold - K20A2 Style removePro Intake Manifold - K20Z3 Style removeAlpha 70mm Throttle Body - B/D/F/H Series remove
ImageSupra Turbo 93-98 2JZ-GTE (14mm)| ID1300-XDSSupra Turbo 93-98 2JZ-GTE (14mm)| ID1300-XDSSupra Turbo 93-98 2JZ-GTE (14mm)| ID1300-XDSSupra Turbo 93-98 2JZ-GTE (14mm)| ID1300-XDSSupra Turbo 93-98 2JZ-GTE (14mm)| ID1300-XDSSupra Turbo 93-98 2JZ-GTE (14mm)| ID1300-XDS
SKU1300.60.14.14.6|Supra Turbo 93-98 2JZ-GTE (14mm)350-06-51001000307-05-0310307-05-0320309-05-1050
Rating
Price$1,417.50$1,493.10 $210.99$55.00$85.00 $473.99 $473.99 $125.99
Stock
Availability
Add to cart

Select options

Add to cart

Select options

Add to cart

Add to cart

Add to cart

DescriptionID1300-XDS, for Supra Turbo 1993-1998 / 2JZ-GTE applications. Currently top fed. 14mm (purple) top. Set of 6. Base Specifications
  • Nominal Flow Rate – 1340cc/min @ 3.0 Bar (43.5 psi) Using Iso Octane at 52 Degrees C (125 Degrees F)
  • Maximum Differential Fuel Pressure – 6.0 Bar (87.0 psi)
  • Fuel Compatibility – Compatible With All Known Fuels – (Designed Specifically for Alternative Fuels)
  • Electrical Connector – USCAR
350-06-5100 Fitment:
  • 2003 - 2005 Mitsubishi Lancer Evolution VIII (2.0L Turbo)
  • 2006 - 2007 Mitsubishi Lancer Evolution IX (2.0L Turbo)
Features: · Up to 3% Gain Just by Keeping Fuel Cooler · -8 AN End Threads with 0.625" Internal Bore · Can Support Up to 1200HP · Can Be Used with Stock Fuel System · Chemical Resistant to All Fuels including Alcohol  

Inlet Shield is a product completely manufactured in Puerto Rico. It is designed to protect the turbo getting damage from any debris entering through the compressor wheel.

  • Using a Mesh in Stainless Steel 316, Custom Silicone Sleeve and a Tension Stainless Steel clamp
307-05-0310 Ideal for turbocharged and naturally aspirated applications. 70mm throttle body opening can be port-matched up to 76mm. '06+ Civic Si use part # 307-05-0320 / 307-05-0325 *Re-uses OEM Coolant Neck*
  • 2003 - 2007 Honda Accord (2.4L EX/LX)
  • 2002 - 2005 Honda Civic (1.6L Si)
  • 2002 - 2005 Honda CR-V (2.4L EX/LX)
  • 2003 - 2011 Honda Element (2.4L EX/LX)
  • 2002 - 2006 Acura RSX (2.0L Base/Type S)
307-05-0320 Fitment:
  • 2006 - 2011 Honda Civic (2.0L Si)
  • 2004 - 2008 Acura TSX (2.4L K24A2)
Ideal for turbocharged and naturally aspirated applications. 72mm throttle body opening can be port-matched up to 76mm. Only compatible with '06-'11 Civic Si K-series engine.
309-05-1050
FEATURES: Precision Die-Cast Aluminum Fine Shot-Blasted Surface Finish Precision Machined Brass Throttle Plate Compatible w/ OEM Throttle Cable Sealed Ball Bearings for Smooth Operation New Throttle Body Gasket and Hardware Idle Adjustment Screws for Fine Tuning
ContentThe ID1300 is an all new injector, designed in partnership with Bosch Motorsport. This collaboration has given us the ability to design a high flow injector with characteristics specific to the needs of the motorsport tuner. The ID1300 was designed with alternative fuels in mind, and is the only performance injector available with all stainless internals. It is compatibwle with all known fuels, and will stand up to the corrosive nature of alcohol better than any injector on the market. While the ID1300 was designed with an eye towards ethanol fueled engines, we have accounted for the occasional need to convert back to gasoline. The ID1300 has a minimum fuel mass compatible with gasoline use, and will provide exceptional idle and cruise behavior under these conditions. In addition to its multi-fuel capabilities, the compact body of the ID1300 allows fitment in 200+ applications, making it the most versatile injector in our lineup. The 1300 has continued to be refined and improved over the years, and the 1300-XDS is the latest and best version to date.Skunk2’s Composite Fuel Rails are made using a proprietary casting process, from a carbon reinforced aerospace thermo-polymer composite that is 33% lighter, 60% stronger, and runs up to 100 degrees (F) cooler than aluminum. The Composite Fuel Rail insulates fuel from both radiant and conductive heat transfer underneath the hood better than aluminum, resulting in increased horsepower and torque.   Composite Fuel Rails also feature large 0.625-inch internal bores for superior fuel injector pulsation dampening, machined with a smooth interior finish and feature radius-cut fuel injector outlets for improved flow characteristics. Conventional extruded and drilled aluminum rails are typically flawed by design due to machine limitations, resulting sharp internal angles where the main bore meets the fuel injector bores. Eliminating this design flaw limitation can only be achieved with the natural-flow-moldable composite materials. Skunk2’s Composite Fuel Rails are compatible with the factory fuel system, as well as all pump and race fuels, including alcohol. The Skunk2 Composite Fuel Rail can support up to 1,200hp, with gains as high as three percent realized during testing.    Skunk2's engineers looked to the popular '06-'10 Civic Si’s RBC intake manifold for inspiration when developing our Pro Series Intake Manifold for the '02-'05 Civic Si and '02-'06 RSX/ RSX Type S, and/ or any swap using the K20A/ K20A2/ K20Z1/ K24A1 engines or cylinder heads and we are happy to say they have finally arrived! Each of Skunk2’s Pro Series Intake Manifolds for Honda’s K-series engines feature larger plenums and shorter, oversized runners when compared to the RBC, and are cast with thicker wall material, leaving room for further porting for high-horsepower applications. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, Pro Series manifolds were designed for the “street enthusiast” who wants more power but doesn’t want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains. Skunk2’s all-new, cast-aluminum Pro Series Intake Manifolds for Honda’s K-series engines are a direct-fit replacement for all K-series engines (excluding '06-'10 Civic Si) thanks to their unique, patent-pending water neck designs and throttle body flanges, which are compatible with OEM throttle bodies as well as those as large as 76mm. The special water neck designs eliminate the cutting that would otherwise be involved with some RBC applications and the supplied thermal-insulated intake manifold gasket makes for a truly bolt-on installation (no drilling or modifying required). Pro Series manifolds also incorporate an angled-runner design, which allows for ample hood clearance on ’88-’00 Civics and ’90-’01 Integras with K-series engine swaps, as well as additional core support clearance on ’02-’05 Civic Sis. Pro Series Intake Manifolds offer horsepower and torque gains greater than the popular RBC manifold but without compromising mid-range power output. The design incorporates runners that are similar in length to the RBC’s but with larger bores, a special tapered design, as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined and hand-finished to best match the cylinder head’s ports. Skunk2’s Pro Series Intake Manifold’s shape and design also increases wave scavenging effects at the engine’s ideal operating range, which allow for a broad increase in usable power. Skunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2’s Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality. Each manifold is molded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out and features a genuine Skunk2 nameplate.Skunk2's engineers went back to the drawing board when they set out to improve the already popular '06-'11 Civic Si’s RBC intake manifold. Each of Skunk2’s Pro Series Intake Manifolds for Honda’s K-series engines feature larger plenums and shorter, oversized runners when compared to the RBC, and are cast with thicker wall material, leaving room for further porting for high-horsepower applications. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, Pro Series manifolds were designed for the “street enthusiast” who wants more power but doesn’t want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains. Skunk2’s all-new, cast-aluminum Pro Series Intake Manifolds for Honda’s K-series engines are a direct-fit replacement for all '06-'11 Civic Si engines thanks to their unique design and throttle body flanges, which are compatible with OEM throttle bodies as well as those as large as 76mm. A thermal-insulated intake manifold gasket is also included, making for a truly bolt-on installation (no drilling or modifying required). Pro Series manifolds also incorporate an angled-runner design, which allows for ample hood clearance on almost any engine combination. Pro Series Intake Manifolds offer horsepower and torque gains greater than the popular RBC manifold but without compromising mid-range power output. The design incorporates runners that are similar in length to the RBC’s but with larger bores, a special tapered design, as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined and hand-finished to best match the cylinder head’s ports. Skunk2’s Pro Series Intake Manifold’s shape and design also increases wave scavenging effects at the engine’s ideal operating range, which allow for a broad increase in usable power. Skunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2’s Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality. Each manifold is molded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out and features a genuine Skunk2 nameplate.Skunk2 is proud to introduce the 70mm Alpha Series Throttle Body for Honda B16/ B17/ B18/ B20/ D15/ D16/ F20/ F22/ F23/ H22 and H23 engines in its exclusive, fine shot-blasted surface finish. Skunk2’s Alpha Series Throttle Body is designed to be used with Skunk2’s Pro Series Intake Manifolds as well as OEM and other aftermarket intake manifolds for bolt-on horsepower and torque gains by maximizing engine airflow, all at a competitive price.   A larger throttle body is key to producing additional power throughout the powerband on modified engines with increased airflow demands and the Skunk2’s 70mm Alpha Series Throttle Body delivers! Sealed ball bearings, a precision machined throttle plate and a honed oversized bore insures smooth operation on the most aggressive naturally aspirated and forced induction applications.
  • 1990 - 1997 Honda Accord (2.4L DX/LX/EX/SE)
  • 1992 - 2000 Honda Civic (1.6L DX/EX/GX/HX/LX/Si)
  • 1993 - 1997 Honda Del Sol (1.6L S/Si/VTEC)
  • 1992 - 2001 Honda Prelude (2.2L Base/Type SH)
  • 2000 - 2009 Honda S2000 (2.2L F22C)
  • 1990 - 2001 Acura Integra (1.8L GS/GS-R/LS/Type R)
NOTE: Due to Larger Diameter... You Must Use A Skunk2 Pro Series Intake Manifold or Make Adjustments to Intake Manifold Throttle Body Flange to Match Bore and Keep IAC (Idle Air Control) Passage Separate. Not compatible with B18C GS-R intake manifold. Not compatible with D Series engines featuring down-flow intake manifolds. Manual Transmission Only.
Weight122116.271.9
Dimensions1 × 1 × 1 in18 × 6 × 6 in7 × 8 × 1 inN/A20 × 15 × 9 in10 × 8 × 8 in
Additional information
Weight 12 lbs
Dimensions 1 × 1 × 1 in
Brand

Injector Dynamics

Weight 2 lbs
Dimensions 18 × 6 × 6 in
Brand

Skunk2

Weight 1 lbs
Dimensions 7 × 8 × 1 in
Brand

Inlet Shield

Brand

Skunk2

Weight 16.27 lbs
Dimensions 20 × 15 × 9 in
Brand

Skunk2

Weight 1.9 lbs
Dimensions 10 × 8 × 8 in
Brand

Skunk2

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
X