Lun - Sab 9:00 am - 5:00 pm

HomeShopTitanium PartsSpeedFactory Titanium Exhaust Manifold Stud Kit for Ford Diesel (6.7L PowerStroke Engine)

SpeedFactory Titanium Exhaust Manifold Stud Kit for Ford Diesel (6.7L PowerStroke Engine)

$176.99$198.99

Description

This SpeedFactory Titanium Exhaust Manifold Stud Kit contains (16) M8 x 1.25mm x 65mm titanium studs, nuts, and washers.

These high strength studs are made of Ti 6Al-4V and incorporate a 3mm hex key tip that allows them to be easily installed using an Allen wrench. Titanium 10mm 12-point nuts and washers are included.

The use of the factory exhaust manifold bolts and studs, especially with the heat cycling of diesel engines, commonly results in stripped or broken bolts and inadequate clamping force, resulting in exhaust leaks. This stud kit looks great and will allow you to properly clamp your exhaust manifolds to the cylinder heads without experiencing sealing problems, stud/nut failure, or ugly and troublesome rust.

Titanium is ~45% lighter, much stronger, and will not corrode like your stock steel bolts or studs.

Each stud/washer/nut assembly weighs only 12.5g!

These stud kits are available in raw or burnt titanium finish.

Fits all 2011-2019 6.7L Ford Diesel Engines

Additional information

Weight 1 lbs
Dimensions 7 × 4.5 × 3.5 in
Brand

SpeedFactory Racing

Reviews

There are no reviews yet.

Be the first to review “SpeedFactory Titanium Exhaust Manifold Stud Kit for Ford Diesel (6.7L PowerStroke Engine)”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsSpeedFactory Titanium Exhaust Manifold Stud Kit for Ford Diesel (6.7L PowerStroke Engine) removeInlet Shield removeAlpha 70mm Throttle Body - B/D/F/H Series removeFuel Rail - Ultra Race - B Series Primary removeHigh Volume Fuel Rail Mitsubishi EVO VIII IX removeSkunk2 Billet Oil Cap - Black remove
ImageSpeedFactory Titanium Exhaust Manifold Stud Kit for Ford Diesel (6.7L PowerStroke Engine)SpeedFactory Titanium Exhaust Manifold Stud Kit for Ford Diesel (6.7L PowerStroke Engine)SpeedFactory Titanium Exhaust Manifold Stud Kit for Ford Diesel (6.7L PowerStroke Engine)SpeedFactory Titanium Exhaust Manifold Stud Kit for Ford Diesel (6.7L PowerStroke Engine)SpeedFactory Titanium Exhaust Manifold Stud Kit for Ford Diesel (6.7L PowerStroke Engine)SpeedFactory Titanium Exhaust Manifold Stud Kit for Ford Diesel (6.7L PowerStroke Engine)
SKU1000309-05-1050350-05-6000350-06-5100626-99-0071
Rating
Price$176.99$198.99$55.00$85.00 $125.99 $188.99 $210.99 $52.99
Stock
Availability
Add to cart

Select options

Select options

Add to cart

Add to cart

Add to cart

Add to cart

Description

Inlet Shield is a product completely manufactured in Puerto Rico. It is designed to protect the turbo getting damage from any debris entering through the compressor wheel.

  • Using a Mesh in Stainless Steel 316, Custom Silicone Sleeve and a Tension Stainless Steel clamp
309-05-1050
FEATURES: Precision Die-Cast Aluminum Fine Shot-Blasted Surface Finish Precision Machined Brass Throttle Plate Compatible w/ OEM Throttle Cable Sealed Ball Bearings for Smooth Operation New Throttle Body Gasket and Hardware Idle Adjustment Screws for Fine Tuning
350-05-6000 Engineers at Skunk2 Racing have developed a Primary Fuel Rail for the popular Ultra Race Intake Manifold. FEATURES: Manufactured from Billet 6061 Aluminum Hard Anodized for Corrosion Resistance Large .669" Internal Bore -8 ORB Ports Supports Up to 1,200HP Compatible w/ E85 and Methanol. Requires Remote Mount Regulator.350-06-5100 Fitment:
  • 2003 - 2005 Mitsubishi Lancer Evolution VIII (2.0L Turbo)
  • 2006 - 2007 Mitsubishi Lancer Evolution IX (2.0L Turbo)
Features: · Up to 3% Gain Just by Keeping Fuel Cooler · -8 AN End Threads with 0.625" Internal Bore · Can Support Up to 1200HP · Can Be Used with Stock Fuel System · Chemical Resistant to All Fuels including Alcohol  
626-99-0071 Skunk2’s Fine Tuning products and accessories, like its Black Billet Oil Caps for most Honda and Acura engines, help put the finishing touches on your vehicle. Consistent with Skunk2’s racing heritage and high-performance parts manufacturing practices, each Black Billet Oil Cap is precision CNC machined and features Skunk2's signature, black anodized finish. Skunk2’s Black Billet Oil Caps feature a 33mm x 2.8mm thread pitch, are compatible with most Honda valve covers, and feature a contrasting, acid-etched Skunk2 logo for the ultimate finishing touch.
ContentThis SpeedFactory Titanium Exhaust Manifold Stud Kit contains (16) M8 x 1.25mm x 65mm titanium studs, nuts, and washers. These high strength studs are made of Ti 6Al-4V and incorporate a 3mm hex key tip that allows them to be easily installed using an Allen wrench. Titanium 10mm 12-point nuts and washers are included. The use of the factory exhaust manifold bolts and studs, especially with the heat cycling of diesel engines, commonly results in stripped or broken bolts and inadequate clamping force, resulting in exhaust leaks. This stud kit looks great and will allow you to properly clamp your exhaust manifolds to the cylinder heads without experiencing sealing problems, stud/nut failure, or ugly and troublesome rust. Titanium is ~45% lighter, much stronger, and will not corrode like your stock steel bolts or studs. Each stud/washer/nut assembly weighs only 12.5g! These stud kits are available in raw or burnt titanium finish. Fits all 2011-2019 6.7L Ford Diesel EnginesSkunk2 is proud to introduce the 70mm Alpha Series Throttle Body for Honda B16/ B17/ B18/ B20/ D15/ D16/ F20/ F22/ F23/ H22 and H23 engines in its exclusive, fine shot-blasted surface finish. Skunk2’s Alpha Series Throttle Body is designed to be used with Skunk2’s Pro Series Intake Manifolds as well as OEM and other aftermarket intake manifolds for bolt-on horsepower and torque gains by maximizing engine airflow, all at a competitive price.   A larger throttle body is key to producing additional power throughout the powerband on modified engines with increased airflow demands and the Skunk2’s 70mm Alpha Series Throttle Body delivers! Sealed ball bearings, a precision machined throttle plate and a honed oversized bore insures smooth operation on the most aggressive naturally aspirated and forced induction applications.
  • 1990 - 1997 Honda Accord (2.4L DX/LX/EX/SE)
  • 1992 - 2000 Honda Civic (1.6L DX/EX/GX/HX/LX/Si)
  • 1993 - 1997 Honda Del Sol (1.6L S/Si/VTEC)
  • 1992 - 2001 Honda Prelude (2.2L Base/Type SH)
  • 2000 - 2009 Honda S2000 (2.2L F22C)
  • 1990 - 2001 Acura Integra (1.8L GS/GS-R/LS/Type R)
NOTE: Due to Larger Diameter... You Must Use A Skunk2 Pro Series Intake Manifold or Make Adjustments to Intake Manifold Throttle Body Flange to Match Bore and Keep IAC (Idle Air Control) Passage Separate. Not compatible with B18C GS-R intake manifold. Not compatible with D Series engines featuring down-flow intake manifolds. Manual Transmission Only.
Fitment:
  • 1999 - 2000 Honda Civic (1.6L Si)
  • 1994 - 1997 Honda Del Sol (1.6L VTEC)
  • 1992 - 2001 Acura Integra (1.8L GS/GS-R/LS/Type R)
Skunk2’s Composite Fuel Rails are made using a proprietary casting process, from a carbon reinforced aerospace thermo-polymer composite that is 33% lighter, 60% stronger, and runs up to 100 degrees (F) cooler than aluminum. The Composite Fuel Rail insulates fuel from both radiant and conductive heat transfer underneath the hood better than aluminum, resulting in increased horsepower and torque.   Composite Fuel Rails also feature large 0.625-inch internal bores for superior fuel injector pulsation dampening, machined with a smooth interior finish and feature radius-cut fuel injector outlets for improved flow characteristics. Conventional extruded and drilled aluminum rails are typically flawed by design due to machine limitations, resulting sharp internal angles where the main bore meets the fuel injector bores. Eliminating this design flaw limitation can only be achieved with the natural-flow-moldable composite materials. Skunk2’s Composite Fuel Rails are compatible with the factory fuel system, as well as all pump and race fuels, including alcohol. The Skunk2 Composite Fuel Rail can support up to 1,200hp, with gains as high as three percent realized during testing.    
Weight111.91.2520.4
Dimensions7 × 4.5 × 3.5 in7 × 8 × 1 in10 × 8 × 8 in16 × 5 × 3 in18 × 6 × 6 in6 × 5 × 3 in
Additional information
Weight 1 lbs
Dimensions 7 × 4.5 × 3.5 in
Brand

SpeedFactory Racing

Weight 1 lbs
Dimensions 7 × 8 × 1 in
Brand

Inlet Shield

Weight 1.9 lbs
Dimensions 10 × 8 × 8 in
Brand

Skunk2

Weight 1.25 lbs
Dimensions 16 × 5 × 3 in
Brand

Skunk2

Weight 2 lbs
Dimensions 18 × 6 × 6 in
Brand

Skunk2

Weight 0.4 lbs
Dimensions 6 × 5 × 3 in
Brand

Skunk2

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
Compare ×
Let's Compare! Continue shopping
X