Lun - Sab 9:00 am - 5:00 pm

HomeShopEngineOil Catch CansSpeedFactory Rising Sun Angled Catch Can Battery Location

SpeedFactory Rising Sun Angled Catch Can Battery Location

$401.99

SKU: SF-02-033 Category: Tags: , , , ,

Description

The SpeedFactory Racing Rising Sun Angled Oil Catch Can is specifically designed for forced induction and heavily modified naturally aspirated engines. This large-capacity breather setup is engineered to provide the sufficient crankcase ventilation your high performance engine needs, and also condenses crankcase blow-by oil and moisture correctly. The factory PCV system is replaced and all oil vapors are vented to the atmosphere through the laser cut logo.

Our catch cans are CAD designed and CNC press punched using state of the art technology. The catch can and all billet fittings are professionally TIG welded to top off that ultra clean look, and each unit ships with an aluminum mounting bracket attached for ease of installation.

This catch can occupies the factory battery and fuse box location on 92-00 Honda Civic and 94-01 Acura Integra.

This kit includes: (1) catch can with filter and breather plate, (2) -10AN weld fittings on the upper left side, and (2) -10AN weld fittings on the lower left side.

Catch Can Dimensions: 10″ L x 5″ W x 8″ H

Additional information

Weight 5 lbs
Dimensions 11 × 6 × 8 in
Brand

SpeedFactory Racing

Reviews

There are no reviews yet.

Be the first to review “SpeedFactory Rising Sun Angled Catch Can Battery Location”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsSpeedFactory Rising Sun Angled Catch Can Battery Location removeSpeedFactory Billet Aluminum B Series Block Off Plug - Black removeHigh Volume Fuel Rail Mitsubishi EVO VIII IX removeUltra Street Intake Manifold - B VTEC - Black removeSpeedFactory Catch Can Battery Location with 3 Filters removeFuel Rail - Ultra Race - B Series Primary remove
NameSpeedFactory Rising Sun Angled Catch Can Battery Location removeSpeedFactory Billet Aluminum B Series Block Off Plug - Black removeHigh Volume Fuel Rail Mitsubishi EVO VIII IX removeUltra Street Intake Manifold - B VTEC - Black removeSpeedFactory Catch Can Battery Location with 3 Filters removeFuel Rail - Ultra Race - B Series Primary remove
ImageSpeedFactory Rising Sun Angled Catch Can Battery LocationSpeedFactory Rising Sun Angled Catch Can Battery LocationSpeedFactory Rising Sun Angled Catch Can Battery LocationSpeedFactory Rising Sun Angled Catch Can Battery LocationSpeedFactory Rising Sun Angled Catch Can Battery LocationSpeedFactory Rising Sun Angled Catch Can Battery Location
SKUSF-02-033SF-02-021350-06-5100307-05-0505SF-02-031350-05-6000
Rating
Price$401.99$28.99 $210.99 $462.99$235.99 $188.99
Stock
Availability
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description350-06-5100 Fitment:
  • 2003 - 2005 Mitsubishi Lancer Evolution VIII (2.0L Turbo)
  • 2006 - 2007 Mitsubishi Lancer Evolution IX (2.0L Turbo)
Features: · Up to 3% Gain Just by Keeping Fuel Cooler · -8 AN End Threads with 0.625" Internal Bore · Can Support Up to 1200HP · Can Be Used with Stock Fuel System · Chemical Resistant to All Fuels including Alcohol  
307-05-0505 FEATURES: Modular 2pc. Design w/ Removable Plenum Rotatable Plenum Allows Driver-side or Passenger-Side Throttle Body Mounting 1.8L Plenum Volume
** Tapered 8.72" Long High-Velocity Runners w/ Raised Velocity Stack Entries Generously Cast Runner Walls for Porting
 74mm Throttle Body Opening Lightweight 356 Aluminum Alloy Construction 2 x 1/8" NPT and 2 x 1/4" NPT Accessory Ports Hi-Grade Mounting Hardware Thermal Gasket Included Fitment:
  • 1999 - 2000 Honda Civic (1.6L Si)
  • 1994 - 1995 Honda Del Sol (1.6L VTEC)
  • 1992 - 2001 Acura Integra (1.8L GS-R/Type R)
Will NOT work with factory throttle body A minimum of a 68mm throttle body is required.   **Optional Billet Aluminum Plenum Spacer Available in .5L Size  
350-05-6000 Engineers at Skunk2 Racing have developed a Primary Fuel Rail for the popular Ultra Race Intake Manifold. FEATURES: Manufactured from Billet 6061 Aluminum Hard Anodized for Corrosion Resistance Large .669" Internal Bore -8 ORB Ports Supports Up to 1,200HP Compatible w/ E85 and Methanol. Requires Remote Mount Regulator.
ContentThe SpeedFactory Racing Rising Sun Angled Oil Catch Can is specifically designed for forced induction and heavily modified naturally aspirated engines. This large-capacity breather setup is engineered to provide the sufficient crankcase ventilation your high performance engine needs, and also condenses crankcase blow-by oil and moisture correctly. The factory PCV system is replaced and all oil vapors are vented to the atmosphere through the laser cut logo. Our catch cans are CAD designed and CNC press punched using state of the art technology. The catch can and all billet fittings are professionally TIG welded to top off that ultra clean look, and each unit ships with an aluminum mounting bracket attached for ease of installation. This catch can occupies the factory battery and fuse box location on 92-00 Honda Civic and 94-01 Acura Integra. This kit includes: (1) catch can with filter and breather plate, (2) -10AN weld fittings on the upper left side, and (2) -10AN weld fittings on the lower left side. Catch Can Dimensions: 10" L x 5" W x 8" HThe SpeedFactory Billet B-Series Breather Port Plug was designed specifically for use on Honda/Acura B-Series engines to block off the OEM "black box" breather port. This allows you to utilize the (2) M28 threaded holes on the back of the engine block for your aftermarket oil catch can/breather system, resulting in the proper crankcase ventilation your high-performance engine needs.
  • Precision CNC machined from 6061-T6 billet aluminum
  • Black Anodized finish adds durability and eliminates corrosion
  • Dual O-rings for a tight, leak free seal
  • Laser-etched SpeedFactory “SF” logo
Installation Notes: We recommend thoroughly cleaning the port in the block and the plug with brake parts cleaner prior to installation, and then liberally coating it with Honda Bond or Permatex Ultra Grey and allowing it to cure for 24hrs before use. This will act both as lubricant to facilitate installation and then will setup and bond the plug into the block so that it does not blow out in the case of abnormally high crankcase pressures such as during the event of a piston failure.
Skunk2’s Composite Fuel Rails are made using a proprietary casting process, from a carbon reinforced aerospace thermo-polymer composite that is 33% lighter, 60% stronger, and runs up to 100 degrees (F) cooler than aluminum. The Composite Fuel Rail insulates fuel from both radiant and conductive heat transfer underneath the hood better than aluminum, resulting in increased horsepower and torque.   Composite Fuel Rails also feature large 0.625-inch internal bores for superior fuel injector pulsation dampening, machined with a smooth interior finish and feature radius-cut fuel injector outlets for improved flow characteristics. Conventional extruded and drilled aluminum rails are typically flawed by design due to machine limitations, resulting sharp internal angles where the main bore meets the fuel injector bores. Eliminating this design flaw limitation can only be achieved with the natural-flow-moldable composite materials. Skunk2’s Composite Fuel Rails are compatible with the factory fuel system, as well as all pump and race fuels, including alcohol. The Skunk2 Composite Fuel Rail can support up to 1,200hp, with gains as high as three percent realized during testing.    The much anticipated Ultra "Street" intake manifolds for the Honda B16A/ B17A and B18C engine or VTEC cylinder heads has finally arrived! The Ultra Series is years of research and development, culminated in a multi-piece cast aluminum intake manifold that offers advantages that only a modular design could allow. Using the latest in CFD (Computational Fluid Dynamics) software; Skunk2 Racing has created a two-piece modular design that allows for easy disassembly, porting, and plenum volume changes through the use of a removable plenum lid and optional plenum spacers. In addition to CFD testing, the Ultra Series Intake Manifold has undergone extensive in-house dyno testing which has led to a design that is less restrictive, yielding both torque and power gains well over many of the competitors. Skunk2 Racing Ultra Street Intake Manifolds are cast-aluminum, manufactured from high-grade 356 aluminum alloy for strength and lightweight. Each manifold is CNC-machined for a precise fit, and individually inspected for quality assurance. The Ultra Series Street manifold features a generous 74mm throttle body opening and is constructed with thick walls at entry, minimizing concerns of breakthrough when port matching. Intense planning and design went into the plenum to distribute even airflow to all four cylinders under dynamic load conditions. Placement and design of the velocity stacks were rigorously flow tested to ensure maximum delivery of air to the cylinder. Large velocity stack raised bell mouth entries lead to 8.72” long intake runners with smooth transitions allowing the Ultra Street Intake Manifold to really move some air! Skunk2 Racing Ultra Street Intake Manifolds are designed to be used in modified naturally aspirated applications as well as mild turbo/supercharged setups.The SpeedFactory 3-Filter Oil Catch Can is specifically designed for forced induction and heavily modified naturally aspirated engines. This internally baffled breather setup is engineered to provide the sufficient crankcase ventilation your high performance engine needs, and also condenses crankcase blow-by oil and moisture correctly. The factory PCV system is replaced and all oil vapors are vented to the atmosphere through three high quality reusable/washable breather filters.. Our catch cans are CAD designed and CNC lasered using the latest state of the art technology. The billet -10AN fittings are professionally TIG welded to top off that ultra clean look, and all of our Rising Sun catch cans ship with an aluminum mounting bracket attached for ease of installation. This kit includes (1) catch can with internal baffles, (4) -10AN fittings, and (3) breather filters. Catch Can Dimensions: 9"L x 5"W x 4.5"H **Note: this kit is designed to mount in the factory battery tray on 92-00 Civic and 94-01 Integra, but can be used in many other applications what will accommodate the above dimensions.Fitment:
  • 1999 - 2000 Honda Civic (1.6L Si)
  • 1994 - 1997 Honda Del Sol (1.6L VTEC)
  • 1992 - 2001 Acura Integra (1.8L GS/GS-R/LS/Type R)
Weight5121551.25
Dimensions11 × 6 × 8 in7 × 4.5 × 3.5 in18 × 6 × 6 in20 × 16 × 9 in11 × 6 × 8 in16 × 5 × 3 in
Additional information
Weight 5 lbs
Dimensions 11 × 6 × 8 in
Brand

SpeedFactory Racing

Weight 1 lbs
Dimensions 7 × 4.5 × 3.5 in
Brand

SpeedFactory Racing

Weight 2 lbs
Dimensions 18 × 6 × 6 in
Brand

Skunk2

Weight 15 lbs
Dimensions 20 × 16 × 9 in
Brand

Skunk2

Weight 5 lbs
Dimensions 11 × 6 × 8 in
Brand

SpeedFactory Racing

Weight 1.25 lbs
Dimensions 16 × 5 × 3 in
Brand

Skunk2

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
X