RS3/TTRS 2017+| ID1050-XDS
$672.00 – $735.00
ID1050-XDS, for Audi 2.5 TFSI EVO, direct replacement, no adapters. Set of 5.
Base Specifications
- Nominal Flow Rate – 1065cc/min @ 3.0 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F)
- Maximum Differential Fuel Pressure – 10.0 Bar (145.0 psi)
- Fuel Compatibility – Compatible With All Known Fuels
- Electrical Connector – USCAR
Description
The ID1050x is the evolution of the ID1000, and the latest addition to the X-Series. It is the most recent offering from the partnership of Injector Dynamics and Bosch Motorsport, and is the result of lessons learned during development of the ID1300x, and ID1700x.
Like the ID1300x and ID1700x, the ID1050x is not a modified production component. It is a built to spec motorsport injector, offering optimization of critical operating parameters important to you, the motorsport tuner.
To learn more about the nature and development of the X-Series injectors, follow this link.
Compared to the original ID1000, the ID1050x offers numerous improvements, and is sure to become the new reference.
Corrosion resistant internals make it compatible with all known fuels, capable of extended service life with corrosive fuels.
Compact body allows fitment in 200+ applications, including current and future engines utilizing short body injectors.
Improved internal flow path increases output by 5% without sacrificing low flow performance.
Stronger magnetic circuit offers stable operation up to 10 bar.
Replaceable inlet filter extends service life.
Additional information
Weight | 12 lbs |
---|---|
Dimensions | 1 × 1 × 1 in |
Brand | Injector Dynamics |
Quick Comparison
Settings | RS3/TTRS 2017+| ID1050-XDS remove | Pro Intake Manifold - K20Z3 Style remove | Ultra Race Plenum Spacer - 2L Black remove | Pro Intake Manifold - K20Z3 Style - Black remove | Inlet Shield remove | K Series Fuel Rail for Ultra Street and Ultra Race Manifolds - Primary and Secondary remove | ||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | RS3/TTRS 2017+| ID1050-XDS remove | Pro Intake Manifold - K20Z3 Style remove | Ultra Race Plenum Spacer - 2L Black remove | Pro Intake Manifold - K20Z3 Style - Black remove | Inlet Shield remove | K Series Fuel Rail for Ultra Street and Ultra Race Manifolds - Primary and Secondary remove | ||||||||||||||||||||||||||||||||
Image | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ||||||||||||||||||||||||||||||||
SKU | 1050.34.14.14.5|RS3/TTRS 2017+ | 307-05-0320 | 907-05-9052 | 307-05-0325 | 1000 | 350-05-7000 | ||||||||||||||||||||||||||||||||
Rating | ||||||||||||||||||||||||||||||||||||||
Price | $672.00 – $735.00 | $55.00 – $85.00 | ||||||||||||||||||||||||||||||||||||
Stock | ||||||||||||||||||||||||||||||||||||||
Availability | ||||||||||||||||||||||||||||||||||||||
Add to cart | ||||||||||||||||||||||||||||||||||||||
Description | ID1050-XDS, for Audi 2.5 TFSI EVO, direct replacement, no adapters. Set of 5.
Base Specifications
| 307-05-0320
Fitment:
| 907-05-9052 The Skunk2 Racing Plenum Spacer is used to increase the internal volume of the Ultra "Race" Intake Manifolds by 2 Liter. INCLUDES: 2L Billet Aluminum Spacer Longer Socket Head Hardware Gaskets | Ideal for turbocharged and naturally aspirated applications. 72mm throttle body opening can be port-matched up to 76mm. Only compatible with '06-'11 Civic Si K-series engine. | Inlet Shield is a product completely manufactured in Puerto Rico. It is designed to protect the turbo getting damage from any debris entering through the compressor wheel.
| 350-05-7000 FEATURES: Manufactured from Billet 6061 Aluminum Hard Anodized for Corrosion Resistance Large .669" Internal Bore -8 ORB Ports Supports 1,200+ HP | ||||||||||||||||||||||||||||||||
Content | The ID1050x is the evolution of the ID1000, and the latest addition to the X-Series. It is the most recent offering from the partnership of Injector Dynamics and Bosch Motorsport, and is the result of lessons learned during development of the ID1300x, and ID1700x. Like the ID1300x and ID1700x, the ID1050x is not a modified production component. It is a built to spec motorsport injector, offering optimization of critical operating parameters important to you, the motorsport tuner. To learn more about the nature and development of the X-Series injectors, follow this link. Compared to the original ID1000, the ID1050x offers numerous improvements, and is sure to become the new reference. Corrosion resistant internals make it compatible with all known fuels, capable of extended service life with corrosive fuels. Compact body allows fitment in 200+ applications, including current and future engines utilizing short body injectors. Improved internal flow path increases output by 5% without sacrificing low flow performance. Stronger magnetic circuit offers stable operation up to 10 bar. Replaceable inlet filter extends service life. | Skunk2's engineers went back to the drawing board when they set out to improve the already popular '06-'11 Civic Si’s RBC intake manifold. Each of Skunk2’s Pro Series Intake Manifolds for Honda’s K-series engines feature larger plenums and shorter, oversized runners when compared to the RBC, and are cast with thicker wall material, leaving room for further porting for high-horsepower applications. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, Pro Series manifolds were designed for the “street enthusiast” who wants more power but doesn’t want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains. Skunk2’s all-new, cast-aluminum Pro Series Intake Manifolds for Honda’s K-series engines are a direct-fit replacement for all '06-'11 Civic Si engines thanks to their unique design and throttle body flanges, which are compatible with OEM throttle bodies as well as those as large as 76mm. A thermal-insulated intake manifold gasket is also included, making for a truly bolt-on installation (no drilling or modifying required). Pro Series manifolds also incorporate an angled-runner design, which allows for ample hood clearance on almost any engine combination. Pro Series Intake Manifolds offer horsepower and torque gains greater than the popular RBC manifold but without compromising mid-range power output. The design incorporates runners that are similar in length to the RBC’s but with larger bores, a special tapered design, as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined and hand-finished to best match the cylinder head’s ports. Skunk2’s Pro Series Intake Manifold’s shape and design also increases wave scavenging effects at the engine’s ideal operating range, which allow for a broad increase in usable power. Skunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2’s Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality. Each manifold is molded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out and features a genuine Skunk2 nameplate. | Skunk2's engineers went back to the drawing board when they set out to improve the already popular '06-'11 Civic Si’s RBC intake manifold. Each of Skunk2’s Pro Series Intake Manifolds for Honda’s K-series engines feature larger plenums and shorter, oversized runners when compared to the RBC, and are cast with thicker wall material, leaving room for further porting for high-horsepower applications. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, Pro Series manifolds were designed for the “street enthusiast” who wants more power but doesn’t want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains. Skunk2’s all-new, cast-aluminum Pro Series Intake Manifolds for Honda’s K-series engines are a direct-fit replacement for all '06-'11 Civic Si engines thanks to their unique design and throttle body flanges, which are compatible with OEM throttle bodies as well as those as large as 76mm. A thermal-insulated intake manifold gasket is also included, making for a truly bolt-on installation (no drilling or modifying required). Pro Series manifolds also incorporate an angled-runner design, which allows for ample hood clearance on almost any engine combination. Pro Series Intake Manifolds offer horsepower and torque gains greater than the popular RBC manifold but without compromising mid-range power output. The design incorporates runners that are similar in length to the RBC’s but with larger bores, a special tapered design, as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined and hand-finished to best match the cylinder head’s ports. Skunk2’s Pro Series Intake Manifold’s shape and design also increases wave scavenging effects at the engine’s ideal operating range, which allow for a broad increase in usable power. Skunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2’s Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality. Each manifold is molded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out and features a genuine Skunk2 nameplate. | We’ve streamlined the process and revised the design of the K Series Ultra Fuel (350-05-7000) to replace the Ultra Fuel Rails listed below. The Skunk2 Racing K Fuel Rail is the perfect compliment to the Ultra Street Manifold and especially the Ultra Race Intake Manifold with its dual injector positions. This K-Series Fuel Rail is used for both the primary injector position and the secondary injector position. One rail, two positions. REPLACES THESE PREVIOUS FUEL RAILS: • 350-05-6050 DISC- K ULTRA RACE PRIMARY BLACK • 350-05-6055 DISC - K ULTRA STREET FUEL RAIL • 350-05-6060 DISC- K ULTRA RACE SECONDARY BLACK • 350-05-6070 DISC- S2K ULTRA RACE SECONDARY BLACK FEATURES: Manufactured from Billet 6061 Aluminum Hard Anodized for Corrosion Resistance Large .669" Internal Bore -8 ORB Ports Supports 1,200+ HP -8 ORB Ports = 3/4"-16 SAE O-Ring Boss Ports | ||||||||||||||||||||||||||||||||||
Weight | 12 lbs | 16.27 lbs | 3 lbs | N/A | 1 lbs | 3 lbs | ||||||||||||||||||||||||||||||||
Dimensions | 1 × 1 × 1 in | 20 × 15 × 9 in | 20 × 8 × 8 in | N/A | 7 × 8 × 1 in | 18 × 6 × 6 in | ||||||||||||||||||||||||||||||||
Additional information |
|
|
|
|
|
|
Related products
-
-5%
-
-5%
-
-5%
-
-5%
Reviews
There are no reviews yet.