Lun - Sab 9:00 am - 5:00 pm

HomeShopSuspensionSuspension ComponentsRoll Center / Extended Ball JointsRoll Center Adjusters w/Extended Ball Joints – EG/DC2/EK

Roll Center Adjusters w/Extended Ball Joints – EG/DC2/EK

$179.99

Applications:

  • 92-95 Civic EG
  • 96-00 Civic EK
  • 94-01 Integra DC
Note:
* 15mm taller than stock

Description

Roll center adjusters help to maintain proper steering alignment and suspension geometry on lowered cars. If you have lowered your car these are a must have to keep it handling the best.
Old worn and tired bushings will drastically reduce the feel and handling of your car. Replacing worn bushings and suspension components can really make an older car feel new again. Our rubber bushings feature a stiffer durometer than OEM and are designed to last. Spherical bushings are perfect for race cars that need solid but smooth movement of suspension components.
Sold in pairs

Additional information

Weight 2.07 lbs
Dimensions 8 × 6 × 6 in
Brand

K-Tuned

Reviews

There are no reviews yet.

Be the first to review “Roll Center Adjusters w/Extended Ball Joints – EG/DC2/EK”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsRoll Center Adjusters w/Extended Ball Joints - EG/DC2/EK removeK1 Street - EG / EK / DC2 (F-10K / R-6K) - 92-00 Civic / 94-01 Integra removeK1 Street - 97-01 CRV removeFront Lower Control Arms Bushing - Hardened Rubber 8th Gen Civic 2006-11 removeK1-Street Coilovers 2017+ Civic Si Coupe/Sedan (Si ONLY) removeFront Camber Kit S2000 (Rubber) remove
ImageRoll Center Adjusters w/Extended Ball Joints – EG/DC2/EKRoll Center Adjusters w/Extended Ball Joints – EG/DC2/EKRoll Center Adjusters w/Extended Ball Joints – EG/DC2/EKRoll Center Adjusters w/Extended Ball Joints – EG/DC2/EKRoll Center Adjusters w/Extended Ball Joints – EG/DC2/EKRoll Center Adjusters w/Extended Ball Joints – EG/DC2/EK
SKUKTD-RCA-920KTD-K1-CRVKTD-FLB-R61KTD-K1R-FC3KTD-FUR-S2K
Rating
Price$179.99$1,099.99$1,259.98$1,099.99$149.99 $1,099.99$474.99
Stock
Availability
Add to cart

Add to cart

Select options

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionApplications:
  • 92-95 Civic EG
  • 96-00 Civic EK
  • 94-01 Integra DC
Note:
* 15mm taller than stock
Applications:
  • 92-95 Civic EG
  • 96-00 Civic EK
  • 94-01 Integra DC
Spring Rate:
F-10K / R-6K
Note:
* 25% Stiffer Damper
Application:
  • 97-01 CRV RD
Spring Rate:
F-12K / R-7K
Note:
* 25% stiffer damper
Application:
  • 06-11 Civic Si
Application:
  • 2016-Up Civic Coupe/Sedan  Si (Si ONLY)
Note:
* Does NOT fit Non-Si or Type R or Hatchback
* Dash light will be present since electronic struts are being removed. * Front Strut / Knuckle Diameter (Where strut connects to knuckle) - 53mm
* 25% stiffer damper
Spring Rate:
F-7K / R-6K
Applications:
  • 00-04 S2000 AP1
  • 05-09 S2000 AP2
Note:
* Camber plate bolts are to be torqued to 22ft-lbs
Content
Roll center adjusters help to maintain proper steering alignment and suspension geometry on lowered cars. If you have lowered your car these are a must have to keep it handling the best.
Old worn and tired bushings will drastically reduce the feel and handling of your car. Replacing worn bushings and suspension components can really make an older car feel new again. Our rubber bushings feature a stiffer durometer than OEM and are designed to last. Spherical bushings are perfect for race cars that need solid but smooth movement of suspension components.
Sold in pairs
K-Tuned K1 Street Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride.  All setups feature adjustable ride height and NEW 12-way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.
Starting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.
Next we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.
The coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.
K-Tuned K1R Street Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride.  All setups feature adjustable ride height and NEW 12-way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.
Starting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.
Next we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.
The coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.
Upgraded front compliance bushings with hardened rubber bushing.
Old worn and tired bushings will drastically reduce the feel and handling of your car. Replacing worn bushings and suspension components can really make an older car feel new again. Our rubber bushings feature a stiffer durometer than OEM and are designed to last. Spherical bushings are perfect for race cars that need solid but smooth movement of suspension components.
**For instructions click here**
K-Tuned K1R Street Coilovers are designed to give you the best ride quality without sacrificing any comfort or reliability. Our goal was to design a suspension setup that is reliable for daily driving while providing an enjoyable sporty ride.  All setups feature adjustable ride height and NEW 12-way dampening to adapt the ride to your preference. We spent a lot of time sourcing the best components and brought them all together with the help of a reputable engineering company that was up for the task.
Starting with the strut, we invested a lot of time to ensure that they are both durable and reliable. We start with a durable heat-treated steel piston and needle valve to ensure proper travel and linear compression ratio. The strut body is designed to handle the heat and the life cycle it will be put through. Each strut is filled with proprietary oil that is designed to maintain its viscosity even under increased heat or abuse. The oil will keep its unique properties over the years to maintain that same ride quality. This is crucial to the quality and longevity of the strut. Poor quality suspension setups use cheaper oil that can become frothy, lose its strength and degrade overtime. These inferior suspension systems will lose their fluid movement and/or become too soft. We finish the strut piston with longstanding, high-heat rated double seals that are designed to take abuse without breaking a sweat, literally. No leaking struts here. The strut is the most important part of any suspension system. It determines the ride quality and the overall feel. We do not just use a stiffer spring at the suspension to compensate for a poor quality strut; instead we made sure to start from scratch and build a complete coilover that will differentiate itself from the rest.
Next we pair the struts with a high-tensile strength steel spring that is designed to last without sagging or premature wear. Springs are tested to ensure there is no coil bind and full range of motion. The high quality strut and dampening allows us to use the proper spring rates needed for each setup that will complement the adjustable dampening rates. Each spring is mounted on adjustable aluminum perches that can be used to adjust preload and travel. Incorporated washer and spacers are in place to keep the system free moving especially on McPherson style struts.
The coilover system is finished with a combination of powder coating, electroplating, and anodizing to give it a great look and protect it. McPherson style struts feature adjustable upper camber plates and pillow ball mounts.
Front camber kit makes it easy to adjust camber and properly setup and align your car whether that is for street driving or racing.
Old worn and tired bushings will drastically reduce the feel and handling of your car. Replacing worn bushings and suspension components can really make an older car feel new again. Our rubber bushings feature a stiffer durometer than OEM and are designed to last.
Sold in pairs
Disclaimer:
* Please note our K-Tuned Upper Camber Arms are designed for lowered cars only. DO NOT use them to correct camber angles on race cars that are raised higher than stock.The max drop we have tested is 3" lower than stock. If used on a setup lower than 3" or a setup higher than stock, the balljoint could contact the edges of the cup it sits in, and damage could occur.
Weight2.0719.6928.372.0728.376.91
Dimensions8 × 6 × 6 in23 × 7 × 17 in29 × 8 × 17 in8 × 6 × 6 in29 × 8 × 17 in16 × 6 × 10 in
Additional information
Weight 2.07 lbs
Dimensions 8 × 6 × 6 in
Brand

K-Tuned

Weight 19.69 lbs
Dimensions 23 × 7 × 17 in
Brand

K-Tuned

Weight 28.37 lbs
Dimensions 29 × 8 × 17 in
Brand

K-Tuned

Weight 2.07 lbs
Dimensions 8 × 6 × 6 in
Brand

K-Tuned

Weight 28.37 lbs
Dimensions 29 × 8 × 17 in
Brand

K-Tuned

Weight 6.91 lbs
Dimensions 16 × 6 × 10 in
Brand

K-Tuned

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
Compare ×
Let's Compare! Continue shopping
X