Lun - Sab 9:00 am - 5:00 pm

Matrix 01-03| ID1300-XDS

$945.00$995.40

ID1300-XDS, for Matrix XR and XRS 2001-2003. 11mm (blue) adaptor top. Denso lower cushion. Set of 4.

Base Specifications

  • Nominal Flow Rate – 1340cc/min @ 3.0 Bar (43.5 psi) Using Iso Octane at 52 Degrees C (125 Degrees F)
  • Maximum Differential Fuel Pressure – 6.0 Bar (87.0 psi)
  • Fuel Compatibility – Compatible With All Known Fuels – (Designed Specifically for Alternative Fuels)
  • Electrical Connector – USCAR
SKU: 1300.60.11.D.4|Matrix 01-03 Category: Tags: , , , ,

Description

The ID1300 is an all new injector, designed in partnership with Bosch Motorsport. This collaboration has given us the ability to design a high flow injector with characteristics specific to the needs of the motorsport tuner. The ID1300 was designed with alternative fuels in mind, and is the only performance injector available with all stainless internals. It is compatibwle with all known fuels, and will stand up to the corrosive nature of alcohol better than any injector on the market.

While the ID1300 was designed with an eye towards ethanol fueled engines, we have accounted for the occasional need to convert back to gasoline. The ID1300 has a minimum fuel mass compatible with gasoline use, and will provide exceptional idle and cruise behavior under these conditions. In addition to its multi-fuel capabilities, the compact body of the ID1300 allows fitment in 200+ applications, making it the most versatile injector in our lineup. The 1300 has continued to be refined and improved over the years, and the 1300-XDS is the latest and best version to date.

Additional information

Weight 12 lbs
Dimensions 1 × 1 × 1 in
Brand

Injector Dynamics

Reviews

There are no reviews yet.

Be the first to review “Matrix 01-03| ID1300-XDS”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsMatrix 01-03| ID1300-XDS removeFuel Rail - Ultra Race - B Series Secondary removeFuel Rail - Ultra Race - B Series Primary removeUltra Street Plenum Spacer - Black removePro Intake Manifold - K20Z3 Style - Black removePro Intake Manifold - K20A2 Style - Black remove
ImageMatrix 01-03| ID1300-XDSMatrix 01-03| ID1300-XDSMatrix 01-03| ID1300-XDSMatrix 01-03| ID1300-XDSMatrix 01-03| ID1300-XDSMatrix 01-03| ID1300-XDS
SKU1300.60.11.D.4|Matrix 01-03350-05-6010350-05-6000907-05-9101307-05-0325307-05-0315
Rating
Price$945.00$995.40 $188.99 $188.99 $104.99 $504.99 $504.99
Stock
Availability
Add to cart

Select options

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionID1300-XDS, for Matrix XR and XRS 2001-2003. 11mm (blue) adaptor top. Denso lower cushion. Set of 4. Base Specifications
  • Nominal Flow Rate – 1340cc/min @ 3.0 Bar (43.5 psi) Using Iso Octane at 52 Degrees C (125 Degrees F)
  • Maximum Differential Fuel Pressure – 6.0 Bar (87.0 psi)
  • Fuel Compatibility – Compatible With All Known Fuels – (Designed Specifically for Alternative Fuels)
  • Electrical Connector – USCAR
350-05-6010 Engineers at Skunk2 Racing have developed a Secondary Fuel Rail for the popular Ultra Race Intake Manifold. FEATURES: Manufactured from Billet 6061 Aluminum Hard Anodized for Corrosion Resistance Large .669" Internal Bore -8 ORB Ports Supports Up to 1,200HP Compatible w/ E85 and Methanol. Requires Remote Mount Regulator.350-05-6000 Engineers at Skunk2 Racing have developed a Primary Fuel Rail for the popular Ultra Race Intake Manifold. FEATURES: Manufactured from Billet 6061 Aluminum Hard Anodized for Corrosion Resistance Large .669" Internal Bore -8 ORB Ports Supports Up to 1,200HP Compatible w/ E85 and Methanol. Requires Remote Mount Regulator.907-05-9101 The Skunk2 Racing Plenum Spacer is used to increase the internal volume of the Ultra "Street" Intake Manifolds by .50 Liters. INCLUDES: .50L Billet Aluminum Spacer Longer Socket Head Hardware GasketsIdeal for turbocharged and naturally aspirated applications. 72mm throttle body opening can be port-matched up to 76mm. Only compatible with '06-'11 Civic Si K-series engine.307-05-0315 Ideal for turbocharged and naturally aspirated applications. 70mm throttle body opening can be port-matched up to 76mm. Not compatible with '06-'10 Civic Si K-series engine. *Re-uses OEM Coolant Neck*
  • 2003 - 2007 Honda Accord (2.4L EX/LX)
  • 2002 - 2005 Honda Civic (2.0L Si)
  • 2002 - 2005 Honda CR-V (2.4L EX/LX)
  • 2003 - 2011 Honda Element (2.4L EX/LX)
  • 2002 - 2006 Acura RSX (2.0L Base/Type S)
ContentThe ID1300 is an all new injector, designed in partnership with Bosch Motorsport. This collaboration has given us the ability to design a high flow injector with characteristics specific to the needs of the motorsport tuner. The ID1300 was designed with alternative fuels in mind, and is the only performance injector available with all stainless internals. It is compatibwle with all known fuels, and will stand up to the corrosive nature of alcohol better than any injector on the market. While the ID1300 was designed with an eye towards ethanol fueled engines, we have accounted for the occasional need to convert back to gasoline. The ID1300 has a minimum fuel mass compatible with gasoline use, and will provide exceptional idle and cruise behavior under these conditions. In addition to its multi-fuel capabilities, the compact body of the ID1300 allows fitment in 200+ applications, making it the most versatile injector in our lineup. The 1300 has continued to be refined and improved over the years, and the 1300-XDS is the latest and best version to date.Fitment:
  • 1999 - 2000 Honda Civic (1.6L Si)
  • 1994 - 1997 Honda Del Sol (1.6L VTEC)
  • 1992 - 2001 Acura Integra (1.8L GS/GS-R/LS/Type R)
Fitment:
  • 1999 - 2000 Honda Civic (1.6L Si)
  • 1994 - 1997 Honda Del Sol (1.6L VTEC)
  • 1992 - 2001 Acura Integra (1.8L GS/GS-R/LS/Type R)
Skunk2's engineers went back to the drawing board when they set out to improve the already popular '06-'11 Civic Si’s RBC intake manifold. Each of Skunk2’s Pro Series Intake Manifolds for Honda’s K-series engines feature larger plenums and shorter, oversized runners when compared to the RBC, and are cast with thicker wall material, leaving room for further porting for high-horsepower applications. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, Pro Series manifolds were designed for the “street enthusiast” who wants more power but doesn’t want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains. Skunk2’s all-new, cast-aluminum Pro Series Intake Manifolds for Honda’s K-series engines are a direct-fit replacement for all '06-'11 Civic Si engines thanks to their unique design and throttle body flanges, which are compatible with OEM throttle bodies as well as those as large as 76mm. A thermal-insulated intake manifold gasket is also included, making for a truly bolt-on installation (no drilling or modifying required). Pro Series manifolds also incorporate an angled-runner design, which allows for ample hood clearance on almost any engine combination. Pro Series Intake Manifolds offer horsepower and torque gains greater than the popular RBC manifold but without compromising mid-range power output. The design incorporates runners that are similar in length to the RBC’s but with larger bores, a special tapered design, as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined and hand-finished to best match the cylinder head’s ports. Skunk2’s Pro Series Intake Manifold’s shape and design also increases wave scavenging effects at the engine’s ideal operating range, which allow for a broad increase in usable power. Skunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2’s Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality. Each manifold is molded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out and features a genuine Skunk2 nameplate.Skunk2's engineers looked to the popular '06-'10 Civic Si’s RBC intake manifold for inspiration when developing our Pro Series Intake Manifold for the '02-'05 Civic Si and '02-'06 RSX/ RSX Type S, and/ or any swap using the K20A/ K20A2/ K20Z1/ K24A1 engines or cylinder heads and we are happy to say they have finally arrived! Each of Skunk2’s Pro Series Intake Manifolds for Honda’s K-series engines feature larger plenums and shorter, oversized runners when compared to the RBC, and are cast with thicker wall material, leaving room for further porting for high-horsepower applications. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, Pro Series manifolds were designed for the “street enthusiast” who wants more power but doesn’t want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains. Skunk2’s all-new, cast-aluminum Pro Series Intake Manifolds for Honda’s K-series engines are a direct-fit replacement for all K-series engines (excluding '06-'10 Civic Si) thanks to their unique, patent-pending throttle body flanges, which are compatible with OEM throttle bodies as well as those as large as 76mm. Pro Series manifolds also incorporate an angled-runner design, which allows for ample hood clearance on ’88-’00 Civics and ’90-’01 Integras with K-series engine swaps, as well as additional core support clearance on ’02-’05 Civic Si. Pro Series Intake Manifolds offer horsepower and torque gains greater than the popular RBC manifold but without compromising mid-range power output. The design incorporates runners that are similar in length to the RBC’s but with larger bores, a special tapered design, as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined and hand-finished to best match the cylinder head’s ports. Skunk2’s Pro Series Intake Manifold’s shape and design also increases wave scavenging effects at the engine’s ideal operating range, which allow for a broad increase in usable power. Skunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2’s Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality. Each manifold is molded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out and features a genuine Skunk2 nameplate.
Weight121.251.253
Dimensions1 × 1 × 1 in16 × 5 × 3 in16 × 5 × 3 in13 × 9 × 1 inN/AN/A
Additional information
Weight 12 lbs
Dimensions 1 × 1 × 1 in
Brand

Injector Dynamics

Weight 1.25 lbs
Dimensions 16 × 5 × 3 in
Brand

Skunk2

Weight 1.25 lbs
Dimensions 16 × 5 × 3 in
Brand

Skunk2

Weight 3 lbs
Dimensions 13 × 9 × 1 in
Brand

Skunk2

Brand

Skunk2

Brand

Skunk2

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
Compare ×
Let's Compare! Continue shopping
X