DRAG CARTEL K-series Port Covers "Intake & Exhaust" Constructed Of 8620 Lightweight Billet Aluminum and Hard Anodized Black For Style & Strength
Required: Pro Series XP Valve Springs, Titanium Retainers.
Recommended: High-compression, Engine Management, deep valve pockets.
For complete lift and duration specifications, see Camshafts Specifications below:
Intake Duration / Lift: 266° / 12.55mm
Exhaust Duration / Lift: 277° / 11.81mm
Intake Centerline: 100°
Exhaust Centerline: 105°
Valve Clearance (Intake / Exhaust): .007” / .008”
RPM Range: 1,500 - 9,800 rpm
HP Gains: 20 - 25 hp
Torque Gains: 16 - 20 lb-ft
Fitment:
1988 - 2000 Honda Civic (1.6L CX/DX/EX/GX/HX/LX)
1988 - 1991 Honda CR-X (1.6L Base/Si/HF)
1993 - 1997 Honda Del Sol (1.6L S/Si)
Content
CARTEL Adjustable CAM GEARS ARE MADE WITH 8620 Billet MATERIAL
Gears Are Carbonized To Aircraft Spec For Maximum Wear Resistance
Polished Centers With Cartel Trademark Logo.
After years of high end race and DYNO testing DC has released a line of 8620 steel billet camshafts that deliver the ultimate in high performance. Made from aerospace grade, 8620 steel billet material and CNC ground on state-of-the-art cam grinders, these DC cams deliver the utmost in rigidity at extended rpm range while reducing possible valve float. These are the best cams money can buy and are now available for all stages. The "K Series" is Honda's mass produced version of the roller rocker valve train assembly. Less friction, more rpm potential, faster action cam profiles...this engine has untapped potential.
Gain an extra 20-25 hp and retain your factory idle and low-speed emissions with Skunk2’s Tuner Series Stage 3 Camshafts, our introductory line of high-performance camshafts for Honda’s B16/ B17/ B18 VTEC engines. Tuner Series Stage 3 Camshafts are designed to increase power at higher rpm as well as optimize horsepower and torque on engines featuring free-flowing intake and exhaust tracts, increased compression, and upgraded valvetrain. As a result, VTEC crossover is dramatic, allowing for that classic primary-to-secondary surge. What’s more, Tuner Series Stage 3 Camshafts have helped power numerous race teams to victory over the years, reaching legendary status the world over. No other line of high-performance camshafts even comes close to Skunk2’s Tuner Series.
First introduced in 1999, Tuner Series Camshafts are manufactured from the same proprietary, high-quality cores as Skunk2’s more aggressive Pro Series Camshafts, are CNC ground, and feature unique profiles and lobe shapes that emphasize an exceptional idle and low emissions.
Skunk2 camshafts deliver unparalleled power as a result of continual, extensive development and testing. By utilizing advanced manufacturing techniques and the latest computerized simulation and modeling equipment, Skunk2 camshafts are able to deliver maximum power across the entire powerband. Skunk2 designs and tests all of its camshafts in-house to ensure the highest quality and performance. Each camshaft is manufactured of newly revised chill-cast, billet camshaft blanks that have increased torsional strength, improved durability characteristics, and reduced frictional effects. All Skunk2 camshafts are ground to exact specifications using state-of-the-art CNC cam grinding machines equipped with cubic-boron grinding wheels and feature hardened, wear-resistant lobes and surfaces.
Skunk2 camshafts designs are the direct result of our years of drag racing and road racing efforts. In addition to each Skunk2 project car and race vehicle, the world’s top road racing and drag racing teams have relied on Skunk2 camshafts for years.
An engine’s camshafts must be set at their proper positions relative to the crankshaft in order to maximize horsepower. The Pro Series Cam Gear for Honda's D15/ D16 SOHC engines enables serious tuners to optimize horsepower and torque by being able to adjust camshaft timing +/- 10 degrees, allowing them to tailor the power curve appropriately. Thanks to laser-etched timing and directional marks, precise camshaft adjustments can be made quickly and easily. Pro Series Cam Gears feature precision-machined, hard-anodized teeth to reduce premature wear with a signature, six-bolt design that eliminates gear slipping. Skunk2’s lightweight design (35 percent lighter than OEM) and CNC-machined, 7075-T6 billet aluminum construction reduces rotational inertia, resulting in increased engine response and acceleration. Skunk2’s adjustable cam gears have also been proven on race cars in the most extreme conditions for more than a decade.
Gear does not include a woodruff key, you will need to supply a B-Series woodruff key from a local Honda Dealership.
OEM Part # 90741-657-000
Add a Skunk2 Pro Series Intake Manifold and Throttle Body for the ultimate power increase.
After years of high end race and DYNO testing DC has released a line of 8620 steel billet camshafts that deliver the ultimate in high performance. Made from aerospace grade, 8620 steel billet material and CNC ground on state-of-the-art cam grinders, these DC cams deliver the utmost in rigidity at extended rpm range while reducing possible valve float. These are the best cams money can buy and are now available for all stages. The "K Series" is Honda's mass produced version of the roller rocker valve train assembly. Less friction, more rpm potential, faster action cam profiles...this engine has untapped potential.
Reviews
There are no reviews yet.