Lun - Sab 9:00 am - 5:00 pm

HomeShopFuel SystemInjectorsID1300-XDSNissanGTR (R35) FOR V1 T1 Rails| ID1300-XDS

GTR (R35) FOR V1 T1 Rails| ID1300-XDS

$1,417.50$1,493.10

ID1300-XDS, for R35 / VR38. 14mm (purple) adapter top. 14mm bottom o-ring. Set of 6. (No rails included)

Base Specifications

  • Nominal Flow Rate – 1340cc/min @ 3.0 Bar (43.5 psi) Using Iso Octane at 52 Degrees C (125 Degrees F)
  • Maximum Differential Fuel Pressure – 6.0 Bar (87.0 psi)
  • Fuel Compatibility – Compatible With All Known Fuels – (Designed Specifically for Alternative Fuels)
  • Electrical Connector – USCAR
SKU: 1300.60.14.14.6|GTR (R35) FOR V1 T1 Rails Category: Tags: , , , ,

Description

The ID1300 is an all new injector, designed in partnership with Bosch Motorsport. This collaboration has given us the ability to design a high flow injector with characteristics specific to the needs of the motorsport tuner. The ID1300 was designed with alternative fuels in mind, and is the only performance injector available with all stainless internals. It is compatibwle with all known fuels, and will stand up to the corrosive nature of alcohol better than any injector on the market.

While the ID1300 was designed with an eye towards ethanol fueled engines, we have accounted for the occasional need to convert back to gasoline. The ID1300 has a minimum fuel mass compatible with gasoline use, and will provide exceptional idle and cruise behavior under these conditions. In addition to its multi-fuel capabilities, the compact body of the ID1300 allows fitment in 200+ applications, making it the most versatile injector in our lineup. The 1300 has continued to be refined and improved over the years, and the 1300-XDS is the latest and best version to date.

Additional information

Weight 12 lbs
Dimensions 1 × 1 × 1 in
Brand

Injector Dynamics

Reviews

There are no reviews yet.

Be the first to review “GTR (R35) FOR V1 T1 Rails| ID1300-XDS”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsGTR (R35) FOR V1 T1 Rails| ID1300-XDS removeInlet Shield removeK Series Fuel Rail for Ultra Street and Ultra Race Manifolds - Primary and Secondary removePro Intake Manifold - B18C1 - Black removePro Intake Manifold - D Series removeUltra Street Intake Manifold - B VTEC remove
ImageGTR (R35) FOR V1 T1 Rails| ID1300-XDSGTR (R35) FOR V1 T1 Rails| ID1300-XDSGTR (R35) FOR V1 T1 Rails| ID1300-XDSGTR (R35) FOR V1 T1 Rails| ID1300-XDSGTR (R35) FOR V1 T1 Rails| ID1300-XDSGTR (R35) FOR V1 T1 Rails| ID1300-XDS
SKU1300.60.14.14.6|GTR (R35) FOR V1 T1 Rails1000350-05-7000307-05-0275307-05-0260307-05-0500
Rating
Price$1,417.50$1,493.10$55.00$85.00 $188.99 $283.99 $252.99 $410.99
Stock
Availability
Add to cart

Select options

Select options

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionID1300-XDS, for R35 / VR38. 14mm (purple) adapter top. 14mm bottom o-ring. Set of 6. (No rails included) Base Specifications
  • Nominal Flow Rate – 1340cc/min @ 3.0 Bar (43.5 psi) Using Iso Octane at 52 Degrees C (125 Degrees F)
  • Maximum Differential Fuel Pressure – 6.0 Bar (87.0 psi)
  • Fuel Compatibility – Compatible With All Known Fuels – (Designed Specifically for Alternative Fuels)
  • Electrical Connector – USCAR

Inlet Shield is a product completely manufactured in Puerto Rico. It is designed to protect the turbo getting damage from any debris entering through the compressor wheel.

  • Using a Mesh in Stainless Steel 316, Custom Silicone Sleeve and a Tension Stainless Steel clamp
350-05-7000 FEATURES: Manufactured from Billet 6061 Aluminum Hard Anodized for Corrosion Resistance Large .669" Internal Bore -8 ORB Ports Supports 1,200+ HP307-05-0275 Limited-edition, Black Series finish. Ideal for turbocharged and naturally aspirated applications. Eliminated secondary butterflies for improved airflow and horsepower. 70mm throttle body opening can be port-matched up to 74mm.  307-05-0260 Not compatible with OEM D-series throttle body. Must use larger-bore Skunk2 throttle body or similar. Not directly compatible with Civic Wagon or Wagovan; clearance modifications required. Not directly compatible with '96-'00 Civic; brake proportioning valve and fuel filter clearance required. Ideal for turbocharged and naturally aspirated applications. 66mm throttle body opening can be port-matched up to 70mm.FEATURES: Modular 2pc. Design w/ Removable Plenum Rotatable Plenum Allows Driver-side or Passenger-Side Throttle Body Mounting 1.8L Plenum Volume
** Tapered 8.72" Long High-Velocity Runners w/ Raised Velocity Stack Entries Generously Cast Runner Walls for Porting
 74mm Throttle Body Opening Lightweight 356 Aluminum Alloy Construction 2 x 1/8" NPT and 2 x 1/4" NPT Accessory Ports Hi-Grade Mounting Hardware Thermal Gasket Included Will not work with factory throttle body. A minimum of a 68mm throttle body is required.
ContentThe ID1300 is an all new injector, designed in partnership with Bosch Motorsport. This collaboration has given us the ability to design a high flow injector with characteristics specific to the needs of the motorsport tuner. The ID1300 was designed with alternative fuels in mind, and is the only performance injector available with all stainless internals. It is compatibwle with all known fuels, and will stand up to the corrosive nature of alcohol better than any injector on the market. While the ID1300 was designed with an eye towards ethanol fueled engines, we have accounted for the occasional need to convert back to gasoline. The ID1300 has a minimum fuel mass compatible with gasoline use, and will provide exceptional idle and cruise behavior under these conditions. In addition to its multi-fuel capabilities, the compact body of the ID1300 allows fitment in 200+ applications, making it the most versatile injector in our lineup. The 1300 has continued to be refined and improved over the years, and the 1300-XDS is the latest and best version to date.We’ve streamlined the process and revised the design of the K Series Ultra Fuel (350-05-7000) to replace the Ultra Fuel Rails listed below. The Skunk2 Racing K Fuel Rail is the perfect compliment to the Ultra Street Manifold and especially the Ultra Race Intake Manifold with its dual injector positions. This K-Series Fuel Rail is used for both the primary injector position and the secondary injector position. One rail, two positions. REPLACES THESE PREVIOUS FUEL RAILS: • 350-05-6050 DISC- K ULTRA RACE PRIMARY BLACK • 350-05-6055 DISC - K ULTRA STREET FUEL RAIL • 350-05-6060 DISC- K ULTRA RACE SECONDARY BLACK • 350-05-6070 DISC- S2K ULTRA RACE SECONDARY BLACK FEATURES: Manufactured from Billet 6061 Aluminum Hard Anodized for Corrosion Resistance Large .669" Internal Bore -8 ORB Ports Supports 1,200+ HP -8 ORB Ports = 3/4"-16 SAE O-Ring Boss PortsMore than a decade ago, Skunk2’s engineers looked to the popular Integra Type R intake manifold for inspiration and went back to the drawing board. Skunk2’s Pro Series Intake Manifold in our signature Black Series finish for Honda's B-series VTEC engines (GS-R only) features a larger plenum and oversized runners when compared to the ITR manifold for maximum horsepower and torque gains. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, the Pro Series manifold was designed for the “street enthusiast” who wants more power but doesn’t want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains. Skunk2’s cast-aluminum Pro Series Intake Manifolds for Honda’s B-series engines are a direct-fit replacement for all B-series engines thanks to three separate flange designs and are compatible with all factory sensors and throttle bodies as large as 75mm. Pro Series Intake Manifolds offer horsepower and torque gains greater than competitors’ manifolds but without compromising mid-range power output. The design incorporates specially tapered runners as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined to best match the cylinder head’s ports. Skunk2’s Pro Series Intake Manifold’s shape and design also increases wave scavenging effects at the engine’s ideal operating range, which allow for a broad increase in usable power. Skunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2’s Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality. Each manifold is molded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out and features a genuine Skunk2 nameplate.More than a decade ago, Skunk2's engineers revolutionized Honda performance by creating the first-ever, high-flow, cast aluminum intake manifold. Skunk2’s Pro Series Intake Manifold for most Honda SOHC D-series engines features a larger plenum and oversized runners when compared to the OEM version for maximum horsepower and torque gains. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, the Pro Series manifold was designed for the “street enthusiast” who wants more power but doesn’t want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains. Skunk2’s cast-aluminum Pro Series Intake Manifolds for Honda’s D-series engines are a direct-fit replacement for most D-series engines and are compatible with all factory sensors. Pro Series Intake Manifolds offer horsepower and torque gains greater than competitors’ manifolds but without compromising mid-range power output. The design incorporates specially tapered runners as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined to best match the cylinder head’s ports. Skunk2’s Pro Series Intake Manifold’s shape and design also increases wave scavenging effects at the engine’s ideal operating range, which allow for a broad increase in usable power. Skunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2’s Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality. Each manifold is molded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out and features a genuine Skunk2 nameplate.The much anticipated Ultra "Street" intake manifolds for the Honda B16A/ B17A and B18C engine or VTEC cylinder heads! The Ultra Series is years of research and development, culminated in a multi-piece cast aluminum intake manifold that offers advantages that only a modular design could allow. Using the latest in CFD (Computational Fluid Dynamics) software; Skunk2 Racing has created a two-piece modular design that allows for easy disassembly, porting, and plenum volume changes through the use of a removable plenum lid and optional plenum spacers. In addition to CFD testing, the Ultra Series Intake Manifold has undergone extensive in-house dyno testing which has led to a design that is less restrictive, yielding both torque and power gains well over many of the competitors. Skunk2 Racing Ultra Street Intake Manifolds are cast-aluminum, manufactured from high-grade 356 aluminum alloy for strength and lightweight. Each manifold is CNC-machined for a precise fit, and individually inspected for quality assurance. The Ultra Series Street manifold features a generous 74mm throttle body opening and is constructed with thick walls at entry, minimizing concerns of breakthrough when port matching. Intense planning and design went into the plenum to distribute even airflow to all four cylinders under dynamic load conditions. Placement and design of the velocity stacks were rigorously flow tested to ensure maximum delivery of air to the cylinder. Large velocity stack raised bell mouth entries lead to 8.72” long intake runners with smooth transitions allowing the Ultra Street Intake Manifold to really move some air! Skunk2 Racing Ultra Street Intake Manifolds are designed to be used in modified naturally aspirated applications as well as mild turbo/supercharged setups.
Weight121315
Dimensions1 × 1 × 1 in7 × 8 × 1 in18 × 6 × 6 inN/AN/A20 × 16 × 9 in
Additional information
Weight 12 lbs
Dimensions 1 × 1 × 1 in
Brand

Injector Dynamics

Weight 1 lbs
Dimensions 7 × 8 × 1 in
Brand

Inlet Shield

Weight 3 lbs
Dimensions 18 × 6 × 6 in
Brand

Skunk2

Brand

Skunk2

Brand

Skunk2

Weight 15 lbs
Dimensions 20 × 16 × 9 in
Brand

Skunk2

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
Compare ×
Let's Compare! Continue shopping
X