Lun - Sab 9:00 am - 5:00 pm

HomeShopCosmeticCoil Pack Cover – K24Z Series

Coil Pack Cover – K24Z Series

$74.99$91.48

Applications:

  • Honda K24Z Series engines

Note:

Includes 12-15 9th Gen Civic SI
INSTALLATION TIP: When removing the factory coil cover you can use a set of vice grips holding a 10mm socket. This will allow you to leave the cowl cover in place.
SKU: N/A Category: Tags: , ,

Description

Since releasing our original K-Tuned Coil Pack Cover several years ago we have seen a lot of replicas pop up. I guess we must have done something right, so we are back it again and have redesigned the cover for the newer model Honda K24Z Series engines. This fitment is easily identified by the circular moon cut that is needed in order to clear the oil cap. The cover is finished in a wrinkle black powder coating and fits flush on top of the factory valve cover to hide the ugly coils below. We have included 2 different sets of spacers to ensure a proper flush fit. One set is used with a completely stock engine harness and the second set is used if the plastic cover on the coil plug area is removed. Our optional K-Tuned Billet Logo Plate can also be bolted in place to add a more detailed look.
Kit Includes:
2 x small spacers
2 x large spacers
2 x button head bolts
1 x 5/32 allen key

Additional information

Weight 3.42 lbs
Dimensions 19 × 5 × 5 in
Brand

K-Tuned

Reviews

There are no reviews yet.

Be the first to review “Coil Pack Cover – K24Z Series”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsCoil Pack Cover - K24Z Series removePro Intake Manifold - EVO VIII-IX removeUltra Street Plenum Spacer - Black removeUltra Race Plenum Spacer - 2L Black removePro Intake Manifold - K20A2 Style removeInlet Shield remove
ImageCoil Pack Cover – K24Z SeriesCoil Pack Cover – K24Z SeriesCoil Pack Cover – K24Z SeriesCoil Pack Cover – K24Z SeriesCoil Pack Cover – K24Z SeriesCoil Pack Cover – K24Z Series
SKU307-06-0500907-05-9101907-05-9052307-05-03101000
Rating
Price$74.99$91.48 $483.99 $104.99 $173.99 $473.99$55.00$85.00
Stock
Availability
Add to cart

Select options

Add to cart

Add to cart

Add to cart

Add to cart

Select options

DescriptionApplications:
  • Honda K24Z Series engines
Note:
Includes 12-15 9th Gen Civic SI
INSTALLATION TIP: When removing the factory coil cover you can use a set of vice grips holding a 10mm socket. This will allow you to leave the cowl cover in place.
307-06-0500 Match with a Skunk2 Pro Series Throttle Body for an easy 30+ hp gain. -NPT threaded ports - Hardware with plugs or barbed fittings for vacuum purposes - Dipstick Relocator  
  • 2003 - 2005 Mitsubishi Lancer Evolution VIII (2.0L Turbo)
  • 2006 - 2007 Mitsubishi Lancer Evolution IX (2.0L Turbo)
  • 1994 - 1998 Mitsubishi Eclipse (2.0L 4G63T GST/GSX)
907-05-9101 The Skunk2 Racing Plenum Spacer is used to increase the internal volume of the Ultra "Street" Intake Manifolds by .50 Liters. INCLUDES: .50L Billet Aluminum Spacer Longer Socket Head Hardware Gaskets907-05-9052 The Skunk2 Racing Plenum Spacer is used to increase the internal volume of the Ultra "Race" Intake Manifolds by 2 Liter. INCLUDES: 2L Billet Aluminum Spacer Longer Socket Head Hardware Gaskets307-05-0310 Ideal for turbocharged and naturally aspirated applications. 70mm throttle body opening can be port-matched up to 76mm. '06+ Civic Si use part # 307-05-0320 / 307-05-0325 *Re-uses OEM Coolant Neck*
  • 2003 - 2007 Honda Accord (2.4L EX/LX)
  • 2002 - 2005 Honda Civic (1.6L Si)
  • 2002 - 2005 Honda CR-V (2.4L EX/LX)
  • 2003 - 2011 Honda Element (2.4L EX/LX)
  • 2002 - 2006 Acura RSX (2.0L Base/Type S)

Inlet Shield is a product completely manufactured in Puerto Rico. It is designed to protect the turbo getting damage from any debris entering through the compressor wheel.

  • Using a Mesh in Stainless Steel 316, Custom Silicone Sleeve and a Tension Stainless Steel clamp
Content
Since releasing our original K-Tuned Coil Pack Cover several years ago we have seen a lot of replicas pop up. I guess we must have done something right, so we are back it again and have redesigned the cover for the newer model Honda K24Z Series engines. This fitment is easily identified by the circular moon cut that is needed in order to clear the oil cap. The cover is finished in a wrinkle black powder coating and fits flush on top of the factory valve cover to hide the ugly coils below. We have included 2 different sets of spacers to ensure a proper flush fit. One set is used with a completely stock engine harness and the second set is used if the plastic cover on the coil plug area is removed. Our optional K-Tuned Billet Logo Plate can also be bolted in place to add a more detailed look.
Kit Includes:
2 x small spacers
2 x large spacers
2 x button head bolts
1 x 5/32 allen key
The intake manifold solution street-driven Evo VIII-IX owners have been waiting for is here. Skunk2’s newly designed Evo Pro Series Intake Manifold was designed with “street enthusiasts” who utilize turbochargers as small as the factory unit in mind and want more power without sacrificing mid-range performance. Skunk2’s all-new, cast-aluminum Evo Pro Series Intake Manifold—which was tested and developed on the company’s own Evo Time Attack race car—is a direct-fit replacement and offers significant horsepower and torque gains without compromising mid-range power output. Conventional large-plenum, short-runner intake manifolds provide top-end power gains but suffer in the mid-range. Not Skunk2’s. Its all-new Pro Series Intake Manifold features OEM-length runners with larger bores and a special tapered design as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end gains. Peak gains as high as 33+ whp have been realized when paired with Pro Series Throttle Bodies with positive results across the board, beginning as low as 3,200 rpm. Pro Series Intake Manifolds also feature thicker castings when compared to the OEM piece, which leaves plenty of room for porting, and each runner exit is machined and hand-finished to best match the cylinder head’s ports. The Pro Series Intake Manifold’s unique design increases wave scavenging effects at the engine’s ideal operating range, which allow for a broad increase in usable power. Skunk2’s Evo Pro Series Intake Manifold is a simple bolt-on affair. Unlike other intake manifolds, Skunk2’s incorporates the factory configuration, leaving the throttle body in its original location, which means the original intercooler piping and hoses can be reused. Pro Series Intake Manifolds also include the necessary provisions for the Evo’s brake booster line, MDP sensor, and vacuum accessories (EGR valve excluded), and incorporate two additional 1/8-inch NPT threaded ports, which can be used for any number of vacuum/boost-related devices such as gauges, boost controllers, and more. Each manifold comes equipped with plugs and fittings as well as a dipstick k relocator. Skunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2’s Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality. Each manifold is molded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out and features a genuine Skunk2 nameplate.Skunk2's engineers looked to the popular '06-'10 Civic Si’s RBC intake manifold for inspiration when developing our Pro Series Intake Manifold for the '02-'05 Civic Si and '02-'06 RSX/ RSX Type S, and/ or any swap using the K20A/ K20A2/ K20Z1/ K24A1 engines or cylinder heads and we are happy to say they have finally arrived! Each of Skunk2’s Pro Series Intake Manifolds for Honda’s K-series engines feature larger plenums and shorter, oversized runners when compared to the RBC, and are cast with thicker wall material, leaving room for further porting for high-horsepower applications. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, Pro Series manifolds were designed for the “street enthusiast” who wants more power but doesn’t want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains. Skunk2’s all-new, cast-aluminum Pro Series Intake Manifolds for Honda’s K-series engines are a direct-fit replacement for all K-series engines (excluding '06-'10 Civic Si) thanks to their unique, patent-pending water neck designs and throttle body flanges, which are compatible with OEM throttle bodies as well as those as large as 76mm. The special water neck designs eliminate the cutting that would otherwise be involved with some RBC applications and the supplied thermal-insulated intake manifold gasket makes for a truly bolt-on installation (no drilling or modifying required). Pro Series manifolds also incorporate an angled-runner design, which allows for ample hood clearance on ’88-’00 Civics and ’90-’01 Integras with K-series engine swaps, as well as additional core support clearance on ’02-’05 Civic Sis. Pro Series Intake Manifolds offer horsepower and torque gains greater than the popular RBC manifold but without compromising mid-range power output. The design incorporates runners that are similar in length to the RBC’s but with larger bores, a special tapered design, as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined and hand-finished to best match the cylinder head’s ports. Skunk2’s Pro Series Intake Manifold’s shape and design also increases wave scavenging effects at the engine’s ideal operating range, which allow for a broad increase in usable power. Skunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2’s Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality. Each manifold is molded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out and features a genuine Skunk2 nameplate.
Weight3.42331
Dimensions19 × 5 × 5 inN/A13 × 9 × 1 in20 × 8 × 8 inN/A7 × 8 × 1 in
Additional information
Weight 3.42 lbs
Dimensions 19 × 5 × 5 in
Brand

K-Tuned

Brand

Skunk2

Weight 3 lbs
Dimensions 13 × 9 × 1 in
Brand

Skunk2

Weight 3 lbs
Dimensions 20 × 8 × 8 in
Brand

Skunk2

Brand

Skunk2

Weight 1 lbs
Dimensions 7 × 8 × 1 in
Brand

Inlet Shield

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
Compare ×
Let's Compare! Continue shopping
X