Lun - Sab 9:00 am - 5:00 pm

Cobalt SS (super)| ID1700-XDS

$1,239.00

ID1700-XDS, for 2.0L/2.2L supercharged engines. 60mm length, 14 mm (grey) adaptor top AND (silver) BOTTOM adaptor. Set of 4.

Nominal Flow Rate – 1725cc/min @ 3.0 Bar (43.5 psi) Using Iso-Octane at 52 Degrees C (125 Degrees F)
Maximum Differential Fuel Pressure – 7.0 Bar (101.5 psi)
Fuel Compatibility – Compatible with Methanol/Ethanol/All Known Hydrocarbon Fuels.
Electrical Connector – USCAR

SKU: 1700.60.14.14B.4|Cobalt SS (super) Category: Tags: , , , ,

Description

The ID1700-XDS was designed to fill the gap between the ID1300-XDS and the ID2600-XDS, and like both, it features corrosion resistant internals making it compatible with all known automotive fuels.

A unique magnetic circuit, resulting from a lengthy development program, makes the ID1700-XDS immune to voltage and pressure sensitivity problems that plague other high impedance high flow injectors. The ID1700-XDS excels at high pressures typical of current automotive systems, and will perform flawlessly in these applications.

Application Notes

The ID1700-XDS was designed to be an all fuel compatible injector, capable of very high flow rates. As such, it will most often be used to deliver E85 to boosted engines, or occasionally, gasoline in extreme high horsepower applications. Neither of these applications requires extended linearity at low flow rates, and so this was given a proportionately lower priority during the design process.

The ID1700-XDS will deliver flawless stoichiometric idle and cruise mixtures on E85, but like the ID2600-XDS, should not be expected to do so on gasoline.

If you need flawless drivability on gasoline, the ID1300-XDS will provide this, and is capable of approximately 150hp per injector on E85.

Additional information

Weight 12 lbs
Dimensions 1 × 1 × 1 in
Brand

Injector Dynamics

Reviews

There are no reviews yet.

Be the first to review “Cobalt SS (super)| ID1700-XDS”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsCobalt SS (super)| ID1700-XDS removeUltra Street Plenum Spacer - Black removePro Intake Manifold - EVO VIII-IX removeSkunk2 Billet Oil Cap - Black removeAlpha 70mm Throttle Body - B/D/F/H Series removeUltra Race Plenum Spacer - 1L Black remove
ImageCobalt SS (super)| ID1700-XDSCobalt SS (super)| ID1700-XDSCobalt SS (super)| ID1700-XDSCobalt SS (super)| ID1700-XDSCobalt SS (super)| ID1700-XDSCobalt SS (super)| ID1700-XDS
SKU1700.60.14.14B.4|Cobalt SS (super)907-05-9101307-06-0500626-99-0071309-05-1050907-05-9051
Rating
Price$1,239.00 $104.99 $483.99 $52.99 $125.99 $141.99
Stock
Availability
Add to cart

Select options

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionID1700-XDS, for 2.0L/2.2L supercharged engines. 60mm length, 14 mm (grey) adaptor top AND (silver) BOTTOM adaptor. Set of 4. Nominal Flow Rate – 1725cc/min @ 3.0 Bar (43.5 psi) Using Iso-Octane at 52 Degrees C (125 Degrees F) Maximum Differential Fuel Pressure – 7.0 Bar (101.5 psi) Fuel Compatibility – Compatible with Methanol/Ethanol/All Known Hydrocarbon Fuels. Electrical Connector – USCAR907-05-9101 The Skunk2 Racing Plenum Spacer is used to increase the internal volume of the Ultra "Street" Intake Manifolds by .50 Liters. INCLUDES: .50L Billet Aluminum Spacer Longer Socket Head Hardware Gaskets307-06-0500 Match with a Skunk2 Pro Series Throttle Body for an easy 30+ hp gain. -NPT threaded ports - Hardware with plugs or barbed fittings for vacuum purposes - Dipstick Relocator  
  • 2003 - 2005 Mitsubishi Lancer Evolution VIII (2.0L Turbo)
  • 2006 - 2007 Mitsubishi Lancer Evolution IX (2.0L Turbo)
  • 1994 - 1998 Mitsubishi Eclipse (2.0L 4G63T GST/GSX)
626-99-0071 Skunk2’s Fine Tuning products and accessories, like its Black Billet Oil Caps for most Honda and Acura engines, help put the finishing touches on your vehicle. Consistent with Skunk2’s racing heritage and high-performance parts manufacturing practices, each Black Billet Oil Cap is precision CNC machined and features Skunk2's signature, black anodized finish. Skunk2’s Black Billet Oil Caps feature a 33mm x 2.8mm thread pitch, are compatible with most Honda valve covers, and feature a contrasting, acid-etched Skunk2 logo for the ultimate finishing touch.
309-05-1050
FEATURES: Precision Die-Cast Aluminum Fine Shot-Blasted Surface Finish Precision Machined Brass Throttle Plate Compatible w/ OEM Throttle Cable Sealed Ball Bearings for Smooth Operation New Throttle Body Gasket and Hardware Idle Adjustment Screws for Fine Tuning
907-05-9051 The Skunk2 Racing Plenum Spacer is used to increase the internal volume of the Ultra "Race" Intake Manifolds by 1 Liter. INCLUDES: Billet Aluminum Spacer Longer Socket Head Hardware Gaskets
ContentThe ID1700-XDS was designed to fill the gap between the ID1300-XDS and the ID2600-XDS, and like both, it features corrosion resistant internals making it compatible with all known automotive fuels. A unique magnetic circuit, resulting from a lengthy development program, makes the ID1700-XDS immune to voltage and pressure sensitivity problems that plague other high impedance high flow injectors. The ID1700-XDS excels at high pressures typical of current automotive systems, and will perform flawlessly in these applications. Application Notes The ID1700-XDS was designed to be an all fuel compatible injector, capable of very high flow rates. As such, it will most often be used to deliver E85 to boosted engines, or occasionally, gasoline in extreme high horsepower applications. Neither of these applications requires extended linearity at low flow rates, and so this was given a proportionately lower priority during the design process. The ID1700-XDS will deliver flawless stoichiometric idle and cruise mixtures on E85, but like the ID2600-XDS, should not be expected to do so on gasoline. If you need flawless drivability on gasoline, the ID1300-XDS will provide this, and is capable of approximately 150hp per injector on E85.The intake manifold solution street-driven Evo VIII-IX owners have been waiting for is here. Skunk2’s newly designed Evo Pro Series Intake Manifold was designed with “street enthusiasts” who utilize turbochargers as small as the factory unit in mind and want more power without sacrificing mid-range performance. Skunk2’s all-new, cast-aluminum Evo Pro Series Intake Manifold—which was tested and developed on the company’s own Evo Time Attack race car—is a direct-fit replacement and offers significant horsepower and torque gains without compromising mid-range power output. Conventional large-plenum, short-runner intake manifolds provide top-end power gains but suffer in the mid-range. Not Skunk2’s. Its all-new Pro Series Intake Manifold features OEM-length runners with larger bores and a special tapered design as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end gains. Peak gains as high as 33+ whp have been realized when paired with Pro Series Throttle Bodies with positive results across the board, beginning as low as 3,200 rpm. Pro Series Intake Manifolds also feature thicker castings when compared to the OEM piece, which leaves plenty of room for porting, and each runner exit is machined and hand-finished to best match the cylinder head’s ports. The Pro Series Intake Manifold’s unique design increases wave scavenging effects at the engine’s ideal operating range, which allow for a broad increase in usable power. Skunk2’s Evo Pro Series Intake Manifold is a simple bolt-on affair. Unlike other intake manifolds, Skunk2’s incorporates the factory configuration, leaving the throttle body in its original location, which means the original intercooler piping and hoses can be reused. Pro Series Intake Manifolds also include the necessary provisions for the Evo’s brake booster line, MDP sensor, and vacuum accessories (EGR valve excluded), and incorporate two additional 1/8-inch NPT threaded ports, which can be used for any number of vacuum/boost-related devices such as gauges, boost controllers, and more. Each manifold comes equipped with plugs and fittings as well as a dipstick k relocator. Skunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2’s Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality. Each manifold is molded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out and features a genuine Skunk2 nameplate.Skunk2 is proud to introduce the 70mm Alpha Series Throttle Body for Honda B16/ B17/ B18/ B20/ D15/ D16/ F20/ F22/ F23/ H22 and H23 engines in its exclusive, fine shot-blasted surface finish. Skunk2’s Alpha Series Throttle Body is designed to be used with Skunk2’s Pro Series Intake Manifolds as well as OEM and other aftermarket intake manifolds for bolt-on horsepower and torque gains by maximizing engine airflow, all at a competitive price.   A larger throttle body is key to producing additional power throughout the powerband on modified engines with increased airflow demands and the Skunk2’s 70mm Alpha Series Throttle Body delivers! Sealed ball bearings, a precision machined throttle plate and a honed oversized bore insures smooth operation on the most aggressive naturally aspirated and forced induction applications.
  • 1990 - 1997 Honda Accord (2.4L DX/LX/EX/SE)
  • 1992 - 2000 Honda Civic (1.6L DX/EX/GX/HX/LX/Si)
  • 1993 - 1997 Honda Del Sol (1.6L S/Si/VTEC)
  • 1992 - 2001 Honda Prelude (2.2L Base/Type SH)
  • 2000 - 2009 Honda S2000 (2.2L F22C)
  • 1990 - 2001 Acura Integra (1.8L GS/GS-R/LS/Type R)
NOTE: Due to Larger Diameter... You Must Use A Skunk2 Pro Series Intake Manifold or Make Adjustments to Intake Manifold Throttle Body Flange to Match Bore and Keep IAC (Idle Air Control) Passage Separate. Not compatible with B18C GS-R intake manifold. Not compatible with D Series engines featuring down-flow intake manifolds. Manual Transmission Only.
Weight1230.41.93
Dimensions1 × 1 × 1 in13 × 9 × 1 inN/A6 × 5 × 3 in10 × 8 × 8 in20 × 8 × 8 in
Additional information
Weight 12 lbs
Dimensions 1 × 1 × 1 in
Brand

Injector Dynamics

Weight 3 lbs
Dimensions 13 × 9 × 1 in
Brand

Skunk2

Brand

Skunk2

Weight 0.4 lbs
Dimensions 6 × 5 × 3 in
Brand

Skunk2

Weight 1.9 lbs
Dimensions 10 × 8 × 8 in
Brand

Skunk2

Weight 3 lbs
Dimensions 20 × 8 × 8 in
Brand

Skunk2

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
Compare ×
Let's Compare! Continue shopping
X