Civic 02-05 Si| ID1050-XDS
$546.00 – $596.40
ID1050-XDS, for 02-05 Civic Si / K-series. 14mm (grey) adaptor top. Set of 4.
Base Specifications
- Nominal Flow Rate – 1065cc/min @ 3.0 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F)
- Maximum Differential Fuel Pressure – 10.0 Bar (145.0 psi)
- Fuel Compatibility – Compatible With All Known Fuels
- Electrical Connector – USCAR
Description
The ID1050x is the evolution of the ID1000, and the latest addition to the X-Series. It is the most recent offering from the partnership of Injector Dynamics and Bosch Motorsport, and is the result of lessons learned during development of the ID1300x, and ID1700x.
Like the ID1300x and ID1700x, the ID1050x is not a modified production component. It is a built to spec motorsport injector, offering optimization of critical operating parameters important to you, the motorsport tuner.
To learn more about the nature and development of the X-Series injectors, follow this link.
Compared to the original ID1000, the ID1050x offers numerous improvements, and is sure to become the new reference.
Corrosion resistant internals make it compatible with all known fuels, capable of extended service life with corrosive fuels.
Compact body allows fitment in 200+ applications, including current and future engines utilizing short body injectors.
Improved internal flow path increases output by 5% without sacrificing low flow performance.
Stronger magnetic circuit offers stable operation up to 10 bar.
Replaceable inlet filter extends service life.
Additional information
Weight | 12 lbs |
---|---|
Dimensions | 1 × 1 × 1 in |
Brand | Injector Dynamics |
Quick Comparison
Settings | Civic 02-05 Si| ID1050-XDS remove | Alpha 70mm Throttle Body - B/D/F/H Series remove | Skunk2 Ultra Street Intake Manifold - K20A2 Style - Black remove | Pro Intake Manifold - D Series remove | Ultra Street Intake Manifold - B VTEC remove | Pro Intake Manifold - D Series - Black remove | ||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | Civic 02-05 Si| ID1050-XDS remove | Alpha 70mm Throttle Body - B/D/F/H Series remove | Skunk2 Ultra Street Intake Manifold - K20A2 Style - Black remove | Pro Intake Manifold - D Series remove | Ultra Street Intake Manifold - B VTEC remove | Pro Intake Manifold - D Series - Black remove | ||||||||||||||||||||||||||||
Image | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ||||||||||||||||||||||||||||
SKU | 1050.48.14.14.4|Civic 02-05 Si | 309-05-1050 | 307-05-0605 | 307-05-0260 | 307-05-0500 | 307-05-0265 | ||||||||||||||||||||||||||||
Rating | ||||||||||||||||||||||||||||||||||
Price | $546.00 – $596.40 | |||||||||||||||||||||||||||||||||
Stock | ||||||||||||||||||||||||||||||||||
Availability | ||||||||||||||||||||||||||||||||||
Add to cart | ||||||||||||||||||||||||||||||||||
Description | ID1050-XDS, for 02-05 Civic Si / K-series. 14mm (grey) adaptor top. Set of 4.
Base Specifications
| 309-05-1050
FEATURES:
Precision Die-Cast Aluminum
Fine Shot-Blasted Surface Finish
Precision Machined Brass Throttle Plate
Compatible w/ OEM Throttle Cable
Sealed Ball Bearings for Smooth Operation
New Throttle Body Gasket and Hardware
Idle Adjustment Screws for Fine Tuning
| 307-05-0605 FEATURES: Modular 2pc. Design w/ Removable Plenum Rotatable Plenum Allows Driver-side or Passenger-Side Throttle Body Mounting 1.8L Plenum Volume ** Tapered 6.85" Long High-Velocity Runners w/ Raised Velocity Stack Entries Generously Cast Runner Walls for Porting 71mm Throttle Body Opening Lightweight 356 Aluminum Alloy Construction Hi-Grade Mounting Hardware Thermal Gasket Included 2 x 1/4" NPT and 2 x 1/8" NPT Accessory Ports **Optional Billet Aluminum Plenum Spacer Available in .5L Size | 307-05-0260 Not compatible with OEM D-series throttle body. Must use larger-bore Skunk2 throttle body or similar. Not directly compatible with Civic Wagon or Wagovan; clearance modifications required. Not directly compatible with '96-'00 Civic; brake proportioning valve and fuel filter clearance required. Ideal for turbocharged and naturally aspirated applications. 66mm throttle body opening can be port-matched up to 70mm. | FEATURES: Modular 2pc. Design w/ Removable Plenum Rotatable Plenum Allows Driver-side or Passenger-Side Throttle Body Mounting 1.8L Plenum Volume ** Tapered 8.72" Long High-Velocity Runners w/ Raised Velocity Stack Entries Generously Cast Runner Walls for Porting 74mm Throttle Body Opening Lightweight 356 Aluminum Alloy Construction 2 x 1/8" NPT and 2 x 1/4" NPT Accessory Ports Hi-Grade Mounting Hardware Thermal Gasket Included Will not work with factory throttle body. A minimum of a 68mm throttle body is required. | Skunk2’s cast-aluminum Pro Series Intake Manifolds for Honda’s D-series engines are a direct-fit replacement for most D-series engines and are compatible with all factory sensors. Pro Series Intake Manifolds offer horsepower and torque gains greater than competitors’ manifolds but without compromising mid-range power output. The design incorporates specially tapered runners as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined to best match the cylinder head’s ports. Skunk2’s Pro Series Intake Manifold’s shape and design also increases wave scavenging effects at the engine’s ideal operating range, which allow for a broad increase in usable power. | ||||||||||||||||||||||||||||
Content | The ID1050x is the evolution of the ID1000, and the latest addition to the X-Series. It is the most recent offering from the partnership of Injector Dynamics and Bosch Motorsport, and is the result of lessons learned during development of the ID1300x, and ID1700x. Like the ID1300x and ID1700x, the ID1050x is not a modified production component. It is a built to spec motorsport injector, offering optimization of critical operating parameters important to you, the motorsport tuner. To learn more about the nature and development of the X-Series injectors, follow this link. Compared to the original ID1000, the ID1050x offers numerous improvements, and is sure to become the new reference. Corrosion resistant internals make it compatible with all known fuels, capable of extended service life with corrosive fuels. Compact body allows fitment in 200+ applications, including current and future engines utilizing short body injectors. Improved internal flow path increases output by 5% without sacrificing low flow performance. Stronger magnetic circuit offers stable operation up to 10 bar. Replaceable inlet filter extends service life. | Skunk2 is proud to introduce the 70mm Alpha Series Throttle Body for Honda B16/ B17/ B18/ B20/ D15/ D16/ F20/ F22/ F23/ H22 and H23 engines in its exclusive, fine shot-blasted surface finish. Skunk2’s Alpha Series Throttle Body is designed to be used with Skunk2’s Pro Series Intake Manifolds as well as OEM and other aftermarket intake manifolds for bolt-on horsepower and torque gains by maximizing engine airflow, all at a competitive price.
A larger throttle body is key to producing additional power throughout the powerband on modified engines with increased airflow demands and the Skunk2’s 70mm Alpha Series Throttle Body delivers! Sealed ball bearings, a precision machined throttle plate and a honed oversized bore insures smooth operation on the most aggressive naturally aspirated and forced induction applications.
| The much anticipated Ultra "Street" Intake Manifold for the '02-'05 Civic Si and '02-'06 RSX/ RSX Type S, and/ or any swap using the K20A/ K20A2/ K20Z1/ K24A1 engines or cylinder heads has finally arrived! The Ultra Series is years of research and development, culminated in a multi-piece cast aluminum intake manifold that offers advantages that only a modular design could allow. Using the latest in CFD (Computational Fluid Dynamics) software; Skunk2 Racing has created a two-piece modular design that allows for easy disassembly, porting, and plenum volume changes through the use of a removable plenum lid and optional plenum spacers. In addition to CFD testing, the Ultra Series Intake Manifold has undergone extensive in-house dyno testing which has led to a design that is less restrictive, yielding both torque and power gains well over many of the competitors. Skunk2 Racing Ultra Street Intake Manifolds are cast-aluminum, manufactured from high-grade 356 aluminum alloy for strength and lightweight. Each manifold is CNC-machined for a precise fit, and individually inspected for quality assurance. The Ultra Series Street manifold features a generous 71mm throttle body opening and is constructed with thick walls at entry, minimizing concerns of breakthrough when port matching. Intense planning and design went into the plenum to distribute even airflow to all four cylinders under dynamic load conditions. Placement and design of the velocity stacks were rigorously flow tested to ensure maximum delivery of air to the cylinder. Large velocity stack raised bell mouth entries lead to 6.85” long intake runners with smooth transitions allowing the Ultra Street Intake Manifold to really move some air! Skunk2 Racing Ultra Street Intake Manifolds are designed to be used in modified naturally aspirated applications as well as mild turbo/supercharged setups. | More than a decade ago, Skunk2's engineers revolutionized Honda performance by creating the first-ever, high-flow, cast aluminum intake manifold. Skunk2’s Pro Series Intake Manifold for most Honda SOHC D-series engines features a larger plenum and oversized runners when compared to the OEM version for maximum horsepower and torque gains. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, the Pro Series manifold was designed for the “street enthusiast” who wants more power but doesn’t want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains. Skunk2’s cast-aluminum Pro Series Intake Manifolds for Honda’s D-series engines are a direct-fit replacement for most D-series engines and are compatible with all factory sensors. Pro Series Intake Manifolds offer horsepower and torque gains greater than competitors’ manifolds but without compromising mid-range power output. The design incorporates specially tapered runners as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined to best match the cylinder head’s ports. Skunk2’s Pro Series Intake Manifold’s shape and design also increases wave scavenging effects at the engine’s ideal operating range, which allow for a broad increase in usable power. Skunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2’s Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality. Each manifold is molded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out and features a genuine Skunk2 nameplate. | The much anticipated Ultra "Street" intake manifolds for the Honda B16A/ B17A and B18C engine or VTEC cylinder heads! The Ultra Series is years of research and development, culminated in a multi-piece cast aluminum intake manifold that offers advantages that only a modular design could allow. Using the latest in CFD (Computational Fluid Dynamics) software; Skunk2 Racing has created a two-piece modular design that allows for easy disassembly, porting, and plenum volume changes through the use of a removable plenum lid and optional plenum spacers. In addition to CFD testing, the Ultra Series Intake Manifold has undergone extensive in-house dyno testing which has led to a design that is less restrictive, yielding both torque and power gains well over many of the competitors. Skunk2 Racing Ultra Street Intake Manifolds are cast-aluminum, manufactured from high-grade 356 aluminum alloy for strength and lightweight. Each manifold is CNC-machined for a precise fit, and individually inspected for quality assurance. The Ultra Series Street manifold features a generous 74mm throttle body opening and is constructed with thick walls at entry, minimizing concerns of breakthrough when port matching. Intense planning and design went into the plenum to distribute even airflow to all four cylinders under dynamic load conditions. Placement and design of the velocity stacks were rigorously flow tested to ensure maximum delivery of air to the cylinder. Large velocity stack raised bell mouth entries lead to 8.72” long intake runners with smooth transitions allowing the Ultra Street Intake Manifold to really move some air! Skunk2 Racing Ultra Street Intake Manifolds are designed to be used in modified naturally aspirated applications as well as mild turbo/supercharged setups. | More than a decade ago, Skunk2's engineers revolutionized Honda performance by creating the first-ever, high-flow, cast aluminum intake manifold. Skunk2’s Pro Series Intake Manifold for most Honda SOHC D-series engines features a larger plenum and oversized runners when compared to the OEM version for maximum horsepower and torque gains. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, the Pro Series manifold was designed for the “street enthusiast” who wants more power but doesn’t want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains. Skunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2’s Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality. Each manifold is molded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out and features a genuine Skunk2 nameplate. Not compatible with OEM D-series throttle body. Must use larger-bore Skunk2 throttle body or similar. Not directly compatible with Civic Wagon or Wagovan; clearance modifications required. Not directly compatible with '96-'00 Civic; brake proportioning valve and fuel filter clearance required. Ideal for turbocharged and naturally aspirated applications. 66mm throttle body opening can be port-matched up to 70mm. | ||||||||||||||||||||||||||||
Weight | 12 lbs | 1.9 lbs | 15 lbs | N/A | 15 lbs | N/A | ||||||||||||||||||||||||||||
Dimensions | 1 × 1 × 1 in | 10 × 8 × 8 in | 20 × 16 × 9 in | N/A | 20 × 16 × 9 in | N/A | ||||||||||||||||||||||||||||
Additional information |
|
|
|
|
|
|
Related products
-
-5%
-
-5%
-
-5%
-
-5%
Reviews
There are no reviews yet.