Lun - Sab 9:00 am - 5:00 pm

HomeShopForced InductionSupercharger Systems’04-’05 S2000 Supercharger System – Black Edition w/ AEM V2 EMS
Save $320.8

’04-’05 S2000 Supercharger System – Black Edition w/ AEM V2 EMS

$6,415.99

04-05 S2K 30MM BLK KIT W/ AEM AP2

FEATURES & BENEFITS:
400whp/ 260 lb.ft. Through Skunk2 Header and Exhaust
Retains Factory A/C and Accessories
AEM V2 EMS Tuning Solution w/ Calibration
Grams Performance & Design 1,000cc Injectors
Plug & Play Injector Connectors
Skunk2 4 BAR MAP Sensor
Grams Performance & Design 320lph High Flow Fuel Pump
Rotrex C38-81 Supercharger w/ 90mm Pulley (12.5psi)
Kraftwerks Exclusive Black Anodized Drive Housing
NEW 30mm Drive Belt (10mm Wider Than Previous Generation)
Independent Cogged Drive System for Zero Slip
Front Mount Intercooler (24 x 12 x 3 inch)
Aluminum Intercooler Piping
Oil Cooler
High-Quality CNC-Machined Brackets and Idler Pulley
High-Quality Fasteners and Hardware
Recirculating Bypass Valve
Simple Bolt-On Installation – No cutting, Drilling, or Welding

 

Upgraded Clutch Recommended

Description

Kraftwerks USA is pleased to introduce the newly redesigned supercharger system for the 04-05 Honda S2000.

Centered around the highly efficient Rotrex C38-81 Supercharger, the Kraftwerks Supercharger kit produces impressive results throughout the entire power band. While unlike any other forced induction system, the Kraftwerks supercharger system provides a linear power curve, torque on demand, cooler operating temperatures, and total drivability. The Kraftwerks supercharger system provides instant throttle response and a progressive power curve that increases all the way to redline without the typical ‘spiking’ or ‘surging’ associated with turbochargers. This unique, more usable power curve results in reduced cylinder pressures, less strain on engine components, and increased reliability.

Rotrex superchargers also operate much cooler when compared to turbochargers and other supercharger systems, which reduces the engine’s intake air temperature as well as its risk of detonation. Rotrex superchargers are renowned for their compact size, high adiabatic efficiency, low vibration, and quiet operation. Their unique traction drive technology is what makes all of this possible, which, unlike other superchargers, transmits power through frictional forces between its rolling elements. Each Rotrex unit features its own self-contained oiling system that remains independent of the engine. Its dual-action oil pump supplies traction fluid to the supercharger while the supplied cooler ensures proper fluid temperatures at all times.

Like all Kraftwerks supercharger systems, the S2000 supercharger system includes all the necessary brackets, and hardware for a simple bolt-on installation.

RECOMMENDED BELT TENSION:
NEW BELT (Hz) Min: 260, Max: 275
USED BELT (Hz) Min: 215, Max: 230

Additional information

Weight 90 lbs
Dimensions 32 × 24 × 20 in
Brand

Kraftwerks

Reviews

There are no reviews yet.

Be the first to review “’04-’05 S2000 Supercharger System – Black Edition w/ AEM V2 EMS”

Your email address will not be published. Required fields are marked *

Quick Comparison

Settings'04-'05 S2000 Supercharger System - Black Edition w/ AEM V2 EMS removePro Intake Manifold - B18C1 remove'00-'03 S2000 Supercharger System w/ AEM V2 EMS removeAEM 50-1009 External Fuel Pump removeAEM 50-1220 In-Tank Fuel Pump removeAEM In-Tank Fuel Pumps remove
Name'04-'05 S2000 Supercharger System - Black Edition w/ AEM V2 EMS removePro Intake Manifold - B18C1 remove'00-'03 S2000 Supercharger System w/ AEM V2 EMS removeAEM 50-1009 External Fuel Pump removeAEM 50-1220 In-Tank Fuel Pump removeAEM In-Tank Fuel Pumps remove
Image’04-’05 S2000 Supercharger System – Black Edition w/ AEM V2 EMS’04-’05 S2000 Supercharger System – Black Edition w/ AEM V2 EMS’04-’05 S2000 Supercharger System – Black Edition w/ AEM V2 EMS’04-’05 S2000 Supercharger System – Black Edition w/ AEM V2 EMS’04-’05 S2000 Supercharger System – Black Edition w/ AEM V2 EMS’04-’05 S2000 Supercharger System – Black Edition w/ AEM V2 EMS
SKU150-05-3005B307-05-0270150-05-300350-100950-122050-1000
Rating
Price $6,415.99 $262.99 $6,310.99 $158.40 $122.38 $95.27
Stock
Availability
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description04-05 S2K 30MM BLK KIT W/ AEM AP2 FEATURES & BENEFITS: 400whp/ 260 lb.ft. Through Skunk2 Header and Exhaust Retains Factory A/C and Accessories AEM V2 EMS Tuning Solution w/ Calibration Grams Performance & Design 1,000cc Injectors Plug & Play Injector Connectors Skunk2 4 BAR MAP Sensor Grams Performance & Design 320lph High Flow Fuel Pump Rotrex C38-81 Supercharger w/ 90mm Pulley (12.5psi) Kraftwerks Exclusive Black Anodized Drive Housing NEW 30mm Drive Belt (10mm Wider Than Previous Generation) Independent Cogged Drive System for Zero Slip Front Mount Intercooler (24 x 12 x 3 inch) Aluminum Intercooler Piping Oil Cooler High-Quality CNC-Machined Brackets and Idler Pulley High-Quality Fasteners and Hardware Recirculating Bypass Valve Simple Bolt-On Installation - No cutting, Drilling, or Welding   * Upgraded Clutch Recommended307-05-0270 Ideal for turbocharged and naturally aspirated applications. Eliminated secondary butterflies for improved airflow and horsepower. 70mm throttle body opening can be port-matched up to 74mm.00-03 S2K 30MM KIT W/ AEM AP1 FEATURES & BENEFITS: 400whp/ 260 lb.ft. Through Skunk2 Header and Exhaust Retains Factory A/C and Accessories AEM V2 EMS Tuning Solution w/ Calibration Grams Performance & Design 1,000cc Injectors Plug & Play Injector Connectors Skunk2 4 BAR MAP Sensor Grams Performance & Design 320lph High Flow Fuel Pump Rotrex C38-81 Supercharger w/ 100mm Pulley (12.5psi) NEW 30mm Drive Belt (10mm Wider Than Previous Generation) Independent Cogged Drive System for Zero Slip Front Mount Intercooler (24 x 12 x 3 inch) Aluminum Intercooler Piping Oil Cooler High-Quality CNC-Machined Brackets and Idler Pulley High-Quality Fasteners and Hardware Recirculating Bypass Valve Simple Bolt-On Installation - No cutting, Drilling, or Welding * Upgraded Clutch Recommended RECOMMENDED BELT TENSION: NEW BELT (Hz) Min: 260, Max: 275 USED BELT (Hz) Min: 215, Max: 230AEM 400LPH High Pressure Inline Fuel Pump - M18x1.5 Female Inlet to M12x1.5 Male Outlet
  • Designed for high output naturally aspirated and forced induction EFI vehicles
  • Popular “044 Style” physical configuration with metric fittings for direct replacement of 044 pumps!
  • Maintains very high flow even at boosted fuel pressures; 340 lph @ 73 PSI (30 psi boost)
  • Each pump individually tested to flow minimum of 400lph (105gph) @ 40 PSI
  • Compatible with Flex Fuel (E85/E90) and all types of gasoline (100% Alcohol fuels may diminish fuel pump life)
  • Kit includes fuel pump, check valve fitting, terminal nuts & boots, instructions
AEM 320LPH 65mm Fuel Pump Kit w/o Mounting Hooks - Ethanol Compatible
  • Tested and compatible with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline
  • Designed for high output naturally aspirated and forced induction EFI vehicles
  • In tank design
  • Each pump is tested to flow 340 lph @ 40 PSI
  • Compact body (39mm diameter x 65mm length)
  • Includes Fuel Pump, installation instructions, wiring harness, pre filter and O-rings (use of stock isolator sleeve is recommended)
  • Designed for high output naturally aspirated and forced induction EFI vehicles
  • In tank design
  • Tested to flow 340 lph @ 40 PSI
  • 39mm diameter fits most applications
  • Offset inlet design eases installation
  • Each pump individually tested
  • For gasoline vehicles
  • Kit includes fuel pump, rubber sleeve and end caps, pre filter, hose, clamps and flying lead
ContentKraftwerks USA is pleased to introduce the newly redesigned supercharger system for the 04-05 Honda S2000. Centered around the highly efficient Rotrex C38-81 Supercharger, the Kraftwerks Supercharger kit produces impressive results throughout the entire power band. While unlike any other forced induction system, the Kraftwerks supercharger system provides a linear power curve, torque on demand, cooler operating temperatures, and total drivability. The Kraftwerks supercharger system provides instant throttle response and a progressive power curve that increases all the way to redline without the typical 'spiking' or 'surging' associated with turbochargers. This unique, more usable power curve results in reduced cylinder pressures, less strain on engine components, and increased reliability. Rotrex superchargers also operate much cooler when compared to turbochargers and other supercharger systems, which reduces the engine’s intake air temperature as well as its risk of detonation. Rotrex superchargers are renowned for their compact size, high adiabatic efficiency, low vibration, and quiet operation. Their unique traction drive technology is what makes all of this possible, which, unlike other superchargers, transmits power through frictional forces between its rolling elements. Each Rotrex unit features its own self-contained oiling system that remains independent of the engine. Its dual-action oil pump supplies traction fluid to the supercharger while the supplied cooler ensures proper fluid temperatures at all times. Like all Kraftwerks supercharger systems, the S2000 supercharger system includes all the necessary brackets, and hardware for a simple bolt-on installation. RECOMMENDED BELT TENSION: NEW BELT (Hz) Min: 260, Max: 275 USED BELT (Hz) Min: 215, Max: 230More than a decade ago, Skunk2’s engineers looked to the popular Integra Type R intake manifold for inspiration and went back to the drawing board. Skunk2’s Pro Series Intake Manifold for Honda's B-series VTEC engines (GS-R only) features a larger plenum and oversized runners when compared to the ITR manifold for maximum horsepower and torque gains. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, the Pro Series manifold was designed for the “street enthusiast” who wants more power but doesn’t want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains. Skunk2’s cast-aluminum Pro Series Intake Manifolds for Honda’s B-series engines are a direct-fit replacement for all B-series engines thanks to three separate flange designs and are compatible with all factory sensors and throttle bodies as large as 75mm. Pro Series Intake Manifolds offer horsepower and torque gains greater than competitors’ manifolds but without compromising mid-range power output. The design incorporates specially tapered runners as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined to best match the cylinder head’s ports. Skunk2’s Pro Series Intake Manifold’s shape and design also increases wave scavenging effects at the engine’s ideal operating range, which allow for a broad increase in usable power. Skunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2’s Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality. Each manifold is molded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out and features a genuine Skunk2 nameplate.Kraftwerks USA is pleased to introduce the newly redesigned supercharger system for the '00-'03 Honda S2000. Centered around the highly efficient Rotrex C38-81 Supercharger, the Kraftwerks Supercharger kit produces impressive results throughout the entire power band. While unlike any other forced induction system, the Kraftwerks supercharger system provides a linear power curve, torque on demand, cooler operating temperatures, and total drivability. The Kraftwerks supercharger system provides instant throttle response and a progressive power curve that increases all the way to redline without the typical 'spiking' or 'surging' associated with turbochargers. This unique, more usable power curve results in reduced cylinder pressures, less strain on engine components, and increased reliability. Rotrex superchargers also operate much cooler when compared to turbochargers and other supercharger systems, which reduces the engine’s intake air temperature as well as its risk of detonation. Rotrex superchargers are renowned for their compact size, high adiabatic efficiency, low vibration, and quiet operation. Their unique traction drive technology is what makes all of this possible, which, unlike other superchargers, transmits power through frictional forces between its rolling elements. Each Rotrex unit features its own self-contained oiling system that remains independent of the engine. Its dual-action oil pump supplies traction fluid to the supercharger while the supplied cooler ensures proper fluid temperatures at all times. Like all Kraftwerks supercharger systems, the S2000 supercharger system includes all the necessary brackets, and hardware for a simple bolt-on installation.AEM’s 400lph Metric High Flow, high pressure Inline Fuel Pump (PN 50-1009) is the perfect direct replacement upgrade for 044 pump users who want more fuel flow for their high performance vehicle! The 400lph Metric High-Flow Inline Fuel Pump has an M18X1.5 female inlet and M12x1.5 male outlet. It utilizes the industry standard “044 Style” envelope. It is capable of supporting over 1,200 HP normally aspirated and a whopping 860 HP at 30 psi boost!* It flows 400lph (105 gph) at 40 PSI, 340 lph (90 gph) at 73 PSI, and 270 lph (71 gph) at 120 PSI. Complete flow curves from 35 to 120 PSI and current draw vs. fuel pressure charts are available on the Specs tab. The AEM 400lph Metric High Flow Fuel Pump is rated for use with ethanol-blended fuels, (E85/E90) and all types of gasoline, but pump life will be diminished if used with 100% ethanol fuels. *Power rating given using gasoline and assuming a base fuel pressure of 43 PSI, 13.5v at the pump, 6.2 lbs/gal with a BSFC of 0.65. Boost fuel pressure is assumed to be the base pressure of 43 PSI + boost pressure. Flow capability for horsepower support is ultimately dependent on fuel hose diameter, and system electrical voltage and amperage capabilities.

AEM 320LPH 65mm Fuel Pump Kit w/o Mounting Hooks - Ethanol Compatible

AEM’s 340LPH E85-Compatible High Flow In-Tank Fuel Pumps feature robust internal construction that is designed to withstand the low lubricity characteristics of ethanol and methanol fuels, and are tested to work with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline. Its compact, short body design (65mm length) with mounting hooks also makes it ideal in universal applications that have fuel tanks with tight tolerances. The AEM 340LPH E85-Compatible High Flow In-Tank Fuel Pump is designed for in-tank mounting on high performance naturally aspirated and forced induction vehicles. It features a compact 39mm diameter that fits most applications and an offset inlet design that eases installation. The 340LPH E85-Compatible High Flow In-Tank fuel pump includes a wiring harness, pre filter and O-rings. Every AEM 340LPH E85-Compatible Fuel Pump is tested to flow 340 lph at 40 PSI before it is packaged for sale.
AEM’s 340LPH High Flow In-Tank Fuel Pump is designed for high performance naturally aspirated and forced induction EFI vehicles. It delivers reliable performance and a high volume of fuel flow for a very competitive price. The AEM 340LPH High Flow In-Tank Fuel Pump (PN 50-1000) flows 340 lph (84 gph) at 40 PSI and is capable of supporting over 1,000 HP at 43 PSI.* Please see the flow curves and current draw vs. fuel pressure graphs on the specs tab for more information. This fuel pump is designed for in-tank mounting for use with gasoline and features a compact 39mm diameter that fits most applications. It has an offset inlet design that eases installations and includes a wiring harness, pre filter, internal fuel hose and clamps, end cap and rubber buffer sleeve. Every pump is tested to flow 340 lph at 40 PSI before it is packaged for sale.    
Weight90902.70.91.2
Dimensions32 × 24 × 20 inN/A32 × 24 × 24 in9.3 × 3.4 × 3.1 in5.9 × 2.7 × 2.3 in6.2 × 3.1 × 2.9 in
Additional information
Weight 90 lbs
Dimensions 32 × 24 × 20 in
Brand

Kraftwerks

Brand

Skunk2

Weight 90 lbs
Dimensions 32 × 24 × 24 in
Brand

Kraftwerks

Weight 2.7 lbs
Dimensions 9.3 × 3.4 × 3.1 in
Brand

AEM

Weight 0.9 lbs
Dimensions 5.9 × 2.7 × 2.3 in
Brand

AEM

Weight 1.2 lbs
Dimensions 6.2 × 3.1 × 2.9 in
Brand

AEM

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
X